(Wireless) ADSL VPN Firewall Router with 3DES Accelerator

Chapter 3: Basic Installation

15

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) what

kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE

VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, Service

Name, and Domain Name System (DNS) IP address (it can be automatically

assigned by your ISP when you connect or be set manually).

PPPoA

VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, and

Domain Name System (DNS) IP address (it can be automatically assigned by

your ISP when you connect or be set manually).

RFC1483 Bridged

VPI/VCI, VC-based/LLC-based multiplexing to use Bridged Mode.

RFC1483 Routed

VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask,

Gateway address, and Domain Name System (DNS) IP address (it is fixed IP

address).

IPoA

VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask,

Gateway address, and Domain Name System (DNS) IP address (it is fixed IP

address).

(Wireless) ADSL VPN Firewall Router with 3DES Accelerator

Chapter 3: Basic Installation

16

Configuring with your Web Browser

Open your web browser, enter the IP address of your router, which by default is

192.168.1.254

,

and click “

Go

”, a user name and password window prompt will appear.

The default username

and password are “admin” and “admin”. (See Figure 3.14)

Figure 3.14: User namd & Password Prompt Widonw

Congratulation! You are now successfully logon to the ADSL/(Wireless)ADSL Router!

(Wireless) ADSL VPN Firewall Router with 3DES Accelerator

Chapter 4: Configuration

17

Chapter 4: Configuration

At the configuration homepage, the left navigation pane where bookmarks are provided links

you directly to the desired setup page, including:

Status

(ARP Table, Wireless Association, Routing Table, DHCP Table, PPTP Status,

IPSec Status, L2TP Status, Email Status, Event Log, Error Log, NAT Sessions and

UPnP Portmap)

Quick Start

Configuration

(LAN, WAN, System, Firewall, VPN, QoS, Virtual Server and Advanced)

Save Config to FLASH

Language

(provides user interface in English and German languages).

Please see the relevant sections of this manual for detailed instructions on how to configure

your router.

(Wireless) ADSL VPN Firewall Router with 3DES Accelerator

Chapter 4: Configuration

18

Status

ARP Table

This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the

mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way

of determining the MAC address of the network interface of your PCs to use with the router’s

Firewall – MAC Address Filter

function. See the Firewall section of this manual for more

information on this feature.

IP Address:

A list of IP addresses of devices on your LAN (Local Area Network).

MAC Address:

The MAC (Media Access Control) addresses for each device on your LAN.

Interface:

The interface name (on the router) that this IP Address connects to.

Static:

Static status of the ARP table entry:

“

no

” for dynamically-generated ARP table entries

“

yes

” for static ARP table entries added by the user

(Wireless) ADSL VPN Firewall Router with 3DES Accelerator

Chapter 4: Configuration

19

Routing Table

Routing Table:

Valid:

It indicates a successful routing status.

Destination:

The IP address of the destination network.

Netmask:

The destination netmask address.

Gateway/Interface:

The IP address of the gateway or existing interface that this route will use.

Cost:

The number of hops counted as the cost of the route.

RIP Routing Table:

Destination:

The IP address of the destination network.

Netmask:

The destination netmask address.

Gateway:

The IP address of the gateway that this route will use.

Cost:

The number of hops counted as the cost of the route.