Page 16 / 122
Scroll up to view Page 11 - 15
(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 3: Basic Installation
10
Configuring PCs in Windows
For Windows XP
1.
Go to
Start / Control Panel
(in Classic View). In the
Control Panel, double-click
Network Connections
.
2.
Double-click
Local Area Connection
.
(See Figure 3.1)
3.
In the
LAN Area Connection Status
window, click
Properties
. (
See Figure 3.2)
4.
Select
Internet Protocol (TCP/IP)
and click
Properties
.
(
See Figure 3.3)
5.
Select the
Obtain an IP address automatically
and
Obtain DNS server address automatically
radio
buttons. (
See Figure 3.4
)
6.
Click
OK
to finish the configuration.
Figure 3.1: LAN Area Connection
Figure 3.2: LAN Connection Status
Figure 3.3: TCP / IP
Figure 3.4: IP Address & DNS
Configuration
Page 17 / 122
(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 3: Basic Installation
11
For Windows 2000
1.
Go to
Start / Settings / Control Panel
. In the Control
Panel, double-click
Network
and Dial-up Connections
.
2.
Double-click
Local Area (“LAN”) Connection
.
(See
Figure 3.5)
3.
In the
LAN Area Connection Status
window, click
Properties
.
(See Figure 3.6)
4.
Select
Internet Protocol (TCP/IP)
and click
Properties
.
(See Figure 3.7)
5.
Select the
Obtain an IP address automatically
and
Obtain DNS server address automatically
radio
buttons.
(See Figure 3.8)
6.
Click
OK
to finish the configuration.
Figure 3.5: LAN Area Connection
Figure 3.6: LAN Connection Status
Figure 3.7: TCP / IP
Figure 3.8: IP Address & DNS
Configuration
Page 18 / 122
(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 3: Basic Installation
12
For Windows 98 / ME
1.
Go to
Start / Settings / Control Panel
. In the Control
Panel,
double-click
Network
and
choose
the
Configuration
tab.
2.
Select
TCP / IP -> NE2000 Compatible
, or the name of
any Network Interface Card (NIC) in your PC. (
See
Figure 3.9)
3.
Click
Properties
.
4.
Select the
IP Address
tab. In this page, click the Obtain
an IP address automatically radio button. (
See Figure
3.10)
5.
Then select the
DNS Configuration
tab.
(See Figure
3.11)
6.
Select the
Disable DNS
radio button and click
OK
to
finish the configuration.
Figure 3.9: TCP / IP
Figure 3.10: IP Address
Figure 3.11: DNS Configuration
Page 19 / 122
(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 3: Basic Installation
13
For Windows NT4.0
1.
Go to
Start / Settings / Control Panel
. In the
Control
Panel, double-click
Network
and choose the
Protocols
tab.
2.
Select
TCP/IP Protocol
and click
Properties
. (
See
Figure 3.12)
3.
Select the
Obtain an IP address from a DHCP server
radio button and click
OK
. (
See Figure 3.13)
Figure 3.12: TCP / IP
Figure 3.13: IP Address
Page 20 / 122
(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 3: Basic Installation
14
Factory Default Settings
Before configuring your, you need to know the following default settings.
Web Interface:
Username: admin
Password: admin
LAN Device IP Settings:
Subnet Mask: 255.255.255.0
ISP setting in WAN site:
PPPoE
DHCP server:
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
Username and Password
The default username and password are “
admin
” and “
admin
” respectively.
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory.
The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing from
192.168.1.100 through 192.168.1.199
The PPPoE function is
enabled
to automatically get the WAN
port configuration from the ISP,
but you have to set the
username and password first.
Attention
If you ever forget the password to log in, you may press the RESET button up to
6 seconds to restore the factory default settings.
Attention
19216811.live