Page 36 / 67
Scroll up to view Page 31 - 35
32
Remote Access Screen
Wake On LAN Table
With Wake-on-LAN, a router user can keep his systems turned off while away
and simply click the Wake On LAN activation button on this page to remotely
instruct the AirCruiser G to boot up the host system.
You also have the option
of Wake On & Enable NETBIOS services of any PC in the local LAN Domain.
For this feature, you need either the IP address or the MAC address of your
LAN devices. Key in either values, click enable, and press Wake On LAN to
perform the function.
Figure 6-14 – Wake on LAN
IP Address
The IP Address of the LAN network device which you want to wakeup
MAC Address
The MAC Address of the LAN network device which you want to wakeup
Page 37 / 67
33
Chapter 7 Using Management Tools
The instructions in this chapter will help you how to use the management tools
of the web-based utility to effectively manage your AirCruiser G Wireless
Router.
The PPP Monitor Screen
The
PPP Monitor
screen displays the WAN (Internet) connection status. Click
the
Disconnect
button to end your current session. Click the
Connect
button
to re-connect to the ISP.
Figure 7-1 – PPP Monitor Screen
Page 38 / 67
34
Manage Port Configuration Screen
The
Manage Port Configuration screen
allows you to change the port on
which the AirCruiser’s configuration utility runs.
The default is Port 80 but
users can change this to any port they wish (like 8080, 8000 or else port). In
this case, to access the AirCruiser G configuration utility, you would type
Figure 7-2 – Manage Port Config screen
Page 39 / 67
35
The Reboot Screen
The Reboot screen allows you to reboot the AirCruiser G Wireless Router. You
are also automatically brought to this screen after you confirm OK to any
change of Router settings.
Figure 7-3 – Reboot Router
Page 40 / 67
36
The Initialization Screen
The
Initialization
screen allows you to reset the AirCruiser G back to its
original factory settings.
To initialize the router, use the tip of a pencil or a
paperclip to press and hold the
init
button for 5 seconds and release.
Figure 7-4 – Router Init Screen
19216811.live