Page 56 / 67
Scroll up to view Page 51 - 55
52
Q:
What is the IEEE 802.11g standard?
A:
The
IEEE 802.11g standard specifies data rates of up to 54 Mbps in the
2.45-GHz band. It uses Orthogonal Frequency Division Multiplexing
(OFDM), which is provided by this standard and is compatible with 802.11b
standard offering speeds of about 11 Mbps. This standard uses
Complementary Code Keying (CCK) modulation. Both 11g and 11b can
operate at a range of up to 300 feet.
Q:
When using BR01G in Australia, you will use PPPoA protocol. How to
set up your configuration in BR01G?
A:
Suggestion 1, Using Static IP.
Suggestion 2, Using DHCP client to get IP from ADSL/ Cable modem.
Page 57 / 67
53
Appendix A: Connection Troubleshooting
Problem:
I get a timeout when trying to access the Router administration screen.
Answer:
Verify the router’s IP address as it sometimes will change
depending on your network configuration.
Open up a command terminal by
clicking Start > Run, then type ‘cmd’ and click ok.
At the DOS prompt, type
ipconfig.
The “Default Gateway” IP address is the address of your
AirCruiser G.
Use this number instead of 192.168.1.245 when logging in.
.
Problem:
I can login to the router administration screen, and everything
seems fine, but I can’t connect to the Internet.
Answer:
If you have trouble connecting to the internet, often times its due to
settings in your TCP/IP settings or your web browser.
Step 1
Click the
Start
button. Select
Settings
and then
Control Panel
icon.
Page 58 / 67
54
Step 2
Double-click the
Network and Dial-up Connection
icon.
Step 3
Double-click the
Local Area Connection
icon, and then click the
Properties
button.
Step 4
The
Local Area Connection Properties
window will appear. For the
applicable Ethernet / wireless adapter, make sure that there is a
check in the
Internet Protocol (TCP/IP)
checkbox, then double-click
on “
Internet Protocol (TCP/IP)”
Page 59 / 67
55
Step 5
Select both the
Obtain IP address automatically
and
Obtain DNS
server address automatically
, options and then click
OK
. Continue
clicking on the
OK
button to complete the PC configuration.
Your computer has been configured to obtain an IP address automatically from
the AirCruiser G Wireless Router.
Page 60 / 67
56
Step 6
Open
Internet Explorer.
From the menu select
Tools
and then
click
Internet Options
.
Step 7
From the
Internet Options
window, click the
Connections
tab, and
then click the
LAN Settings
button (see figure below).
Step 8
Now verify that none of the checkboxes have been ticked, and click
on the
OK
button.
Now you will be able to login to the Router and
configure or change network settings.
19216811.live