Page 66 / 237
Scroll up to view Page 61 - 65
OxyGEN
mini
Office
Administrator’s Guide
WARNING
Do not modify the default DSL configuration values, unless instructed so by your Service
Provider. Invalid values can lead to loss of connectivity or degradation of service.
Note
When multiple DSL ports are present (optional feature), each DSL port has its own set of
parameters. Select between the different DSL ports using the appropriate tab at the top
of the page.
Gennet s.a.
66
Page 67 / 237
OxyGEN
mini
Office
Administrator’s Guide
External Modems
The optional USB host ports of OxyGEN
mini
Office can be used for WAN connectivity through the use of
external 3G or analog modems. The list of the configured external modems with their current status is
displayed in the
External Modems
configuration option.
Figure 6.9: List of External Modems
In order to scan for the presence of new, unconfigured USB 3G modems, press
New Scan
. A new
scan for connected USB 3G modems is performed and any connected devices are automatically added
to the list of known modems.
The
Status
column diplays the current status of each external modem, according to the following
color-codes:
Icon
Modem Status
Green
Ready
Orange
Locked. Needs PIN
Red
Locked. Needs PUK
Grey
Not detected
Table 6.1: Modem Status Colors
You can
Edit
and
Delete
configured modems by clicking on the icons
and
respectively of
Action
column. You can also get more information about the status of any modem by clicking on the
Info
icon
of the same column.
Gennet s.a.
67
Page 68 / 237
OxyGEN
mini
Office
Administrator’s Guide
Edit
By clicking on the
Edit
icon
next to a configured modem, a page like the following appears:
Figure 6.10: Edit Modem Parameters
Using this page, the
PIN
of the modem can be configured. It is also possible to disable further use of
PIN by the modem using the
remove PIN
checkbox, to enter a
New PIN
value or to enter the
PUK
code
in case the modem is locked and PUK-unlocking is required.
Info
By clicking on the
Info
icon
next to a configured modem, a page like the following appears:
Figure 6.11: Show Modem Information
This page displays detailed information about the modem and its status, including the modem model
details, the IMEI of the device, the current status, signal strength, connection and usage details.
Gennet s.a.
68
Page 69 / 237
7
Network Menu
The
Network
configuration menu handles all the local network IP services provided by the OxyGEN
mini
Office. Available configuration options include:
Interface Groups
Addresses
DHCP
DNS Settings
Static Routes
Dynamic Routing
Wake On LAN
Public IPs
69
Page 70 / 237
OxyGEN
mini
Office
Administrator’s Guide
Interface Groups
The OxyGEN
mini
Office is a full featured device, capable of supporting more than one service over
the broadband access network. In the typical multi-service deployment scenario, it is essential that the
local Ethernet interfaces are divided and assigned to the different broadband services using private
VLANs. This is what the
Interface Groups
web menu configures: the assignment of local interfaces to the
different broadband services.
Figure 7.1: Interface Groups
To this end, this web configuration page provides a list of all LAN interfaces and supported services
in drop-down lists.
Using the corresponding drop-down list, each interface can be assigned to the
appropriate service group.
Note
The configured broadband connections and the service each of them supports, are
also presented in this page.
However, their membership to Interface Groups cannot
be changed here.
It is handled using the
Service
parameter in the
Connections
configuration page (see page 60).
Gennet s.a.
70
19216811.live