Genexis DRG737v2 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 12 Scroll up to view Page 1 - 5

5

Step 4: Powering the DRG700

Connect the 12V plug of the supplied adapter to the

DRG700 and connect the adapter to a power socket.

Result: The

LED first flashes green. When the

booting process is completed, the

LED will be

solid green.

Note: The complete start-up sequence may take 2-3

minutes.

Step 5:

Connecting your computer

Connect your computer to one of the Ethernet LAN

ports on the DRG700 using an Ethernet cable with a

RJ-45 connector.

Result: The LAN port LED is on (provided that the

computer is on).

Page 7 / 12

6

Step 6: Connecting your telephone

This step is only relevant if the DRG700 has

telephony ports.

Connect a standard telephone handset a telephony

port using a RJ-11 cable.

Result: The

or

LED is on if voice is enabled

and operating correctly. You should hear a dialtone if

you pick up the handset.

Step 7: Connecting your analog television

This step is only relevant if the DRG700 has a CATV

connector.

Connect your television to the CATV connector using

a coaxial cable with a male F-connector.

Result: The

LED is on if CATV is enabled and

operating correctly. You may need to retune your

television if required for the CATV service.

Page 8 / 12

7

3. Network setup

Step 1:

Open your web browser and check if your Internet

connection is working. If your connection is working,

you may skip step 2 and 3.

Step 2:

(The following instructions are only for Windows

Windows 7 / Windows 8. For network setup

instructions on other operating systems, please

consult the user manual.)

1.

Select Start > Control Panel.

2.

In the Network and Internet section, click View

Network Status and Tasks.

3.

Open the panel for network connections:

•

For Windows Vista: Click Manage network

connections at the top left hand corner.

•

For Windows 7: Click Change adapter

settings at the top left hand corner.

4.

Identify the connected network card, right-click

the corresponding Local Area Connection, and

select Properties in the context menu.

5.

Select Internet Protocol Version 4 (TCP/IPv4)

from the list and click Properties.

6.

Select Obtain an IP address automatically and

Obtain DNS server address automatically.

7.

Click OK and close the window.

Step 3:

Open your web browser and check if the network

connection is working. If your connection is not

working, refer to the

Troubleshooting

section on

page 11.

Page 9 / 12

8

4. Wireless setup

This section is only relevant if wireless functionality

is available on your DRG700.

(The following instructions are only for Windows 7 /

Windows 8. For wireless setup instructions on other

operating systems, please consult the user manual.)

Wireless setup using WPA encryption key

Step 1:

Click the network icon in the notification area of the

taskbar. For example:

Step 2:

Select your network SSID and click Connect. The SSID

is the name of the wireless network.

Step 3:

Enter your WPA key and click OK. The WPA key is

the password needed for your secured wireless

network.

Note: You can find the default SSID and the WPA

key on a label shipped with the unit. They are also

printed on the label on the back of the DRG700.

You can change the SSID and the WPA key when you

configure the DRG700.

Wireless setup using WPS

Step 1:

Click the network icon in the notification area of the

taskbar.

Step 2:

Select your network SSID and click Connect.

Step 3:

Press the WPS button on the DRG.

The DRG700 automatically connects to the

computer. The connection is established and is

displayed as “Connected“ in the network list.

Toggling WLAN status

Press the WPS button for >5 seconds and release it.

All user-defined WLAN interfaces are toggled on/

off. Status is indicated by WLAN LED.

Page 10 / 12

9

5. Conﬁguring your DRG700

It is only advised for advanced users to change

the configuration, as doing this might interrupt

your connection. By default the router is

configured properly for most home networks.

Note: For information about how to reset the router

to the factory default settings, see “Reset button” on

page 3.

Requirements:

The configuration program has been tested on the

following browsers:

•

Safari version 5 or later

•

Firefox version 10 or later

•

Internet Explorer version 7.0 or later

•

Google Chrome

The browser must support Javascript.

Step 1:

Launch the web browser on your computer and

enter

“http://router” in the address bar. The

router’s default IP address is “192.168.1.254”.

Step 2:

Log in as “admin”, using the default password

“admin”.

It is strongly advised to change the password

after you logged in for the first time.

Step 3:

Configure the router to the desired configuration.

Read the help text for additional information about

the settings.

Rate

Popular Genexis Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share