Page 71 / 190 Scroll up to view Page 66 - 70
71
Call Forwarding on the ISDN Line
Call Forwarding on the ISDN Line
Call forwarding is performed by the ISDN operator’s
switching station. To use call forwarding, FRITZ!Box must
be connected to an ISDN line. Then this feature can be
used to forward calls to an external line. Call forwarding is
subject to charges by the carrier and cannot be used to
forward calls to Internet numbers.
Configuring the Alarm for a Telephone
N
Pick up the handset.
r881s
<time>
s
<Ext.>
s
Defines the time at which the tele-
phone connected to the analog exten-
sion <Ext.> will ring.
For instance, enter
r881s0700s1s
, if the
telephone at extension “FON 1”
should ring at 07:00 a.m.
r881s
<time>
s
<internal telephone
number>
s
Defines the time at which the DECT or
IP telephone with the specified inter-
nal telephone number will ring.
For instance, enter
r881s0700s610s
, if
the first cordless DECT telephone
should ring at 07:00 a.m.
Cordless DECT telephones have the
internal telephone numbers 610 –
615, IP telephones 620 – 629.
r91ss
Saves the settings.
O
Hang up the handset.
Enabling/Disabling the Alarm
N
Pick up the handset.
r881ss
Enables the alarm.
r881r
Disables the alarm.
r91ss
Saves the settings.
O
Hang up the handset.
Page 72 / 190
Call Forwarding on the ISDN Line
72
In addition to call forwarding, there is also call diversion
via FRITZ!Box. Use this kind of call diversion to divert calls
to internal and external lines. See the section “Call Diver-
sion” on page 76 for more information.
For call forwarding you may specify whether you want in-
coming calls to be forwarded unconditionally, after the
fifth ring, or when busy. Different settings may be config-
ured separately for each number.
Call Forwarding
Immediately
Incoming calls for the given MSN are always diverted im-
mediately to the specified number. Call forwarding is sub-
ject to charges by the carrier and cannot be used for for-
warding calls to Internet numbers.
Do not activate both call forwarding and call diversion at
the same time.
Call Forwarding immediately for Your Outgoing Caller ID
N
Pick up the handset.
s21s
<DNo>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Call Forwarding immediately for Any MSN
N
Pick up the handset.
s21s
<DNo>
s
<MSN>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Call Forwarding immediately for All MSNs
N
Pick up the handset.
s21s
<DNo>
sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Page 73 / 190
73
Call Forwarding on the ISDN Line
Call Forwarding When
Busy
Incoming calls are forwarded to the specified number only
if a call is already being conducted using the number
dialed is busy. You can define call diversion for the local
outgoing call number. The local outgoing call number is
the first number you assigned to an extension. You can al-
so define call diversion for any other number, e.g. a tele-
phone at another extension, or for all numbers. All set-
tings can be disabled at any time.
Disabling Call Forwarding Immediately for Your Outgoing Caller
ID
N
Pick up the handset.
s21sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Disabling Call Forwarding Immediately for Any MSN
N
Pick up the handset.
s21ss
<MSN>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Disabling Call Forwarding immediately for All MSNs
N
Pick up the handset.
s21ssr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Call Forwarding When Busy for Your Outgoing Caller ID
N
Pick up the handset.
s67s
<DNo>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Page 74 / 190
Call Forwarding on the ISDN Line
74
Call Forwarding when Busy for Any MSN
N
Pick up the handset.
s67s
<DNo>
s
<MSN>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Call Forwarding When Busy for All MSNs
N
Pick up the handset.
s67s
<DNo>
sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Disabling Call Forwarding When Busy for Your Outgoing Caller
ID
N
Pick up the handset.
s67sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Disable Call Forwarding When Busy for Any MSN
N
Pick up the handset.
s67ss
<MSN>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Disable Call Forwarding When Busy for All MSNs
N
Pick up the handset.
s67ssr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Page 75 / 190
75
Call Forwarding on the ISDN Line
Call Forwarding
Delayed
Incoming calls are forwarded to the specified number if
not answered at the number originally dialed within
20 seconds (about five rings). Call forwarding can be con-
figured for your extension’s outgoing caller ID (the first
number assigned to an extension), for any number (for in-
stance, a telephone at the other FRITZ!Box extension), or
for all numbers. All settings can be disabled at any time.
Call Forwarding Delayed for Your Outgoing Caller ID
N
Pick up the handset.
s61s
<DNo>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Call Forwarding Delayed for Any MSN
N
Pick up the handset.
s61s
<DNo>
s
<MSN>
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Call Forwarding Delayed for All MSNs
N
Pick up the handset.
s61s
<DNo>
sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.
Disabling Call Forwarding Delayed for Your Outgoing Caller ID
N
Pick up the handset.
s61sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top