FRITZ WLAN 7490 Router Manual PDF (Setup & Configuration Guide)

Page 126 / 197 Scroll up to view Page 121 - 125

FRITZ!Box 7490

126

Alarm

16.9

Alarm

When you configure an alarm, your telephone rings at the

specified time.

Configuring the Alarm

1.

Open the FRITZ!Box user interface, see

page 32

.

2.

Select “Telephony / Alarm”.

3.

Enable the alarm and enter a time.

4.

Select which telephone should ring at the specified

time.

5.

Define here whether the alarm should be repeated.

6.

Click “Apply” to save the settings.

The alarm is configured and enabled.

16.10

Baby Monitor

The following telephones can be configured as a baby moni-

tor:

•

FRITZ!Fon cordless telephones

•

Telephones connected to the “FON 1” or “FON 2” on the

FRITZ!Box.

When a telephone is configured as a baby monitor, it calls a

previously specified telephone number automatically when-

ever the volume in the room reaches a defined level.

Configuring a FRITZ!Fon Cordless Telephone as a Baby

Monitor

1.

Press the menu key on your FRITZ!Fon.

2.

Select “Suppl. services” and then press “OK”.

3.

Select “Baby monitor” and then press “OK”.

4.

Select “Destination no.” and then press “OK”.

Page 127 / 197

Baby Monitor

FRITZ!Box 7490

127

5.

Enter an external telephone number, an internal tele-

phone number or

ss9

for an internal broadcast call.

The internal numbers of the telephones you have con-

nected are listed in telephone book of the FRITZ!Box

user interface.

6.

Press “OK”.

7.

Select “Activation” and “OK”.

8.

Set the sensitivity.

The baby monitor is enabled. The display of your

FRITZ!Fon shows the text “Baby monitor enabled”.

To disable the baby monitor, exit the “Baby Monitor Enabled”

menu.

Configuring a Telephone at the FON Port as a Baby

Monitor

Here is how to configure a telephone at the “FON 1” or

“FON 2” port:

1.

Press the following keys on the telephone:

2.

The baby monitor is enabled. Place the handset near the

child to be monitored.

3.

If the baby monitor is too sensitive, set it to a lower sen-

sitivity. The third button defines the sensitivity. Eight lev-

els are available:

This Is Where the Baby

Monitor Should Call

Keys

Another telephone or mobile

number

s41s

<telephone num-

ber>

r

Internal telephone number,

see

page 128

s41s

<internal telephone

number without **>

r

All other telephones connect-

ed to the FRITZ!Box (broadcast

call)

s41s9r

Page 128 / 197

FRITZ!Box 7490

128

Making Telephone Calls with Convenience Functions

To disable the baby monitor, hang up the handset.

16.11

Making Telephone Calls with Convenience Functions

This chapter describes convenience functions you can use

when placing and making telephone calls, for instance inter-

nal calling, forwarding calls, alternating between calls and

three-party conferences.

Making Internal Calls

You can conduct free, internal calls between telephones con-

nected to the FRITZ!Box.

1.

Enter an internal telephone number on the telephone.

The internal numbers of the telephones you have con-

nected are listed in telephone book of the FRITZ!Box us-

er interface.

2.

Pick up the handset.

Group Call

A group call or broadcast call is an internal call that is sig-

naled on all telephones connected with the FRITZ!Box. The

call is conducted with the party who picks up the telephone

first.

1.

Press the keys

ss9

on the telephone.

2.

Pick up the handset.

Sensitivity

Keys

Highest

s41s

<telephone num-

ber>

r

s42s

<telephone num-

ber>

r

...

Lowest

s48s

<telephone num-

ber>

r

Page 129 / 197

Making Telephone Calls with Convenience Functions

FRITZ!Box 7490

129

Transferring: Forwarding Calls Internally

Here is how to transfer a call to a different telephone:

1.

While you are conducting the call, press the Hold button

R

.

The call is on hold.

2.

Enter an internal number.

The internal numbers of the telephones you have con-

nected are listed in telephone book of the FRITZ!Box us-

er interface.

When the called party accepts the call the second call is

connected.

3.

Hang up to connect the two external parties with each

other.

Defining the Telephone Number for the Next Call

Before making a telephone call you can specify whether the

FRITZ!Box connects the call using the landline or a certain

Internet telephone number.

Dialing rules and telephone numbers configured for the tele-

phone are overridden for this call.

1.

Press the following keys on the telephone:

2.

Enter the telephone number you would like to call.

3.

Pick up the handset.

Make the Call via

Keys

Landline

s111r

Internet telephone number 1

in the FRITZ!Box user interface

under “Telephony / Telephone

Numbers”

s121r

Internet telephone number 2

s122r

Internet telephone number 3

s123r

Other Internet telephone num-

bers

s124r

and so on ...

Page 130 / 197

FRITZ!Box 7490

130

Making Telephone Calls with Convenience Functions

Calling Line Identification Restriction (CLIR) Once for

FON 1 or FON 2

For outgoing calls on the lines “FON 1” and “FON 2” you can

restrict identification of your calling line once (for one call).

1.

Press the keys

s31r

on the telephone.

2.

Enter the telephone number you would like to call.

3.

Pick up the handset.

For this call your telephone number will not be transmitted to

the other caller.

Three-Party Conference Call

Making a Three-Party Conference Call

1.

Connect the first call: Call someone or pick up their call.

2.

Press the Hold button

R

.

Call 1 is on hold.

3.

Connect the second call: Enter an internal or external

telephone number.

When the called party accepts the call the second call is

connected.

4.

Press the keys

R3

.

The three-party conference is set up.

Any party can hang up. The two other parties remain con-

nected.

Interrupting a Three-Party Conference Call

1.

Press the keys

R2

.

2.

You are speaking with party 1 and holding call 2.

3.

Press the following keys on the telephone:

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share