FRITZ WLAN 7360 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

FRITZ

WLAN 7360

Page 86 / 180 Scroll up to view Page 81 - 85

Making Telephone Calls with Convenience Functions

Accepting or Rejecting Waiting Calls on an Analog

Extension of the FRITZ!Box

When the “call waiting” function is switched on, you hear a

signal whenever you receive an external call during an active

telephone conversation. You can then accept the call within

30 seconds. If you do not accept the call, it will be rejected.

You can enable and disable the “call waiting” function in the

FRITZ!Box user interface in the menu “Telephony / Telephony

Devices”.

Accepting Waiting Calls on Other Telephones

When making calls with a cordless DECT telephone registered

on the FRITZ!Box, you can accept waiting calls using the tele-

phone menu.

Accepting or Rejecting Waiting Calls on an Analog Extension

Use this keypad sequence to accept a waiting call.

The first call is on hold.

If you would like to end the first call, hang up the re-

ceiver. As soon as you have hung up your telephone

will ring. When you pick up the receiver, you will be

connected with the waiting call.

If the first call was on hold, you can return to the

first call using this keypad sequence.

With this keypad sequence you can reject a waiting

call.

Page 87 / 180

Making Telephone Calls with Convenience Functions

Alternating Between Calls

During a telephone call you can establish a connection to a

second party. You can alternate between the two parties as

often as you like.

Alternating Between Calls

Call 1

You are talking with party 1.

Press the Hold (“R”) button.

Call party 2.

•

Dial an external telephone number,

•

or dial

and an internal telephone number.

Internal numbers:

Socket “FON 1” of the FRITZ!Box: 1

Cordless DECT telephones: 610 – 615

IP telephones: 620 – 629

Call 2

When party 2 picks up the receiver the call has been

established.

The connection with party 1 is on hold.

If you would like to return to the waiting party 1, dial

the keypad sequence at left.

With this keypad sequence you can alternate be-

tween the two parties as often as you like.

Page 88 / 180

Making Telephone Calls with Convenience Functions

Ending Hold

The waiting party hangs up and you continue the

call with the other party.

You end the call with party 2 by dialing the keypad

sequence at left. The conversation with party 1 is

resumed.

You can end the active call by hanging up the hand-

set. Your phone rings. As soon as you pick up the re-

ceiver you are connected with the waiting party.

Page 89 / 180

Making Telephone Calls with Convenience Functions

Consultation / Hold

You can put a telephone call on hold in order to consult with

another party. You call the second party. The party to the oth-

er call does not hear the consultation; after you are finished

you can resume the call that was on hold.

Consultation / Hold

Call 1

You are talking to caller 1.

Press the Hold button. Call 1 is on hold. Party 1

can no longer hear you.

Establish the connection to party 2: Dial an in-

ternal telephone number (see

page 81

) or an

external telephone number.

Call 2

If party 2 accepts the call, you can conduct the

conversation.

If party 2’s line is busy or the call is not an-

swered, press the Hold button again to return

to call 1.

Use this keypad sequence to return from call 2

back to call 1. Call 1 is now active again.

If you only press the Hold button, the connec-

tion to caller 2 remains on hold until caller 2

hangs up.

You can also end call 2 by hanging up the recei-

ver. Your telephone rings and after you pick up

the receiver again you will be connected with

party 1.

Page 90 / 180

Making Telephone Calls with Convenience Functions

Using Keypad Shortcuts

With keypad sequences you can control the services and fea-

tures of your telephone line.

For information about which keypad sequences you can use,

contact your telephone carrier.

Entering Keypad Sequences on an Extension with Automatic

Outside Dialing

Pick up the handset.

<Seq>

Dial the sequence shown at left. <Seq> stands for a

keyboard sequence.

Entering Keypad Sequences on an Extension without Automatic

Outside Dialing

Pick up the handset.

0sr

<Seq>

Dial the sequence shown at left. <Seq> stands for a

keyboard sequence.

Automatic outside dialing is the default setting in the

FRITZ!Box. If you make a lot of internal calls, you may want to

disable automatic outside dialing. For instructions, see

page 136

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share