Page 21 / 98 Scroll up to view Page 16 - 20
Configuration and Management
1/1551-CRH 102 168 Uen Rev A
2008-12-16
15
3.1.1
Enter PIN Code
The SIM card contains information about the subscription and is normally
protected by a PIN (Personal Identification Number) code and a PUK
(Personal Unblock Key) code.
Normally, you have to enter a PIN code to activate the SIM card. In some
cases, however, PIN authentication is not required and it is possible to use
the SIM card without entering a PIN code.
The
Enter PIN code
page is displayed if a PIN code is required:
Figure 9 - Enter PIN code page
Enter the PIN code (provided with the SIM card).
You can also check “Remember my PIN” to have automatic SIM
authentication in case of a system restart.
Click the
Apply
button to save the settings.
3.1.2
Enter Password
If a PIN code is not needed for SIM authentication, or if automatic SIM
authentication is enabled, the
Enter password
page is displayed:
Page 22 / 98
Configuration and Management
16
1/1551-CRH 102 168 Uen Rev A
2008-12-16
Figure 10 – Enter password page
Type
user
in the “Password” field and click the
Log In
button. For security
purposes, it is recommended to change the default password, see section
3.11 –
Change Password
.
Note:
You might, at any time, be redirected to the
Enter password
page
without your intention if there are any problems with the connection
to the mobile network and/or Internet. In this case, just enter the
password and check the “ALARMS” section on the
Overview
page.
After a successful login, the
Overview
page is displayed, see section 3.2 –
Overview
.
3.1.3
Inactivity Timeout
The WUI has an inactivity timeout set to 20 minutes. Before this timeout
expires, it is preceded by a notification (displayed on top of the current
displayed page) one minute before the automatic logout:
Figure 11 - Inactivity Timeout Warning
The
Cancel
button can be clicked to abort the automatic logout.
Page 23 / 98
Configuration and Management
1/1551-CRH 102 168 Uen Rev A
2008-12-16
17
When the timeout expires, the
Enter password
page is displayed with a
notification about the automatic logout:
Figure 12 – Enter password page (after inactivity timeout)
Enter the “Password” and click
Log In
to make a new login.
Page 24 / 98
Configuration and Management
18
1/1551-CRH 102 168 Uen Rev A
2008-12-16
3.2
Overview
The
Overview
page gives an overview of the settings on the Ericsson W3x
as described below.
Figure 13 - Overview page
The
Overview
page provides the following functions:
The left-hand menu (visible on all web pages) that includes
configuration topics for additional configuration described one by one in
the following sections.
The
Configuration Wizard…
button which is the entrance to the step-
by-step configuration wizard recommended to be used for setting up
your Wireless LAN. See section 3.3 –
Wireless LAN Configuration
Wizard
.
The “ALARMS” section where detected error conditions are specified.
See section 3.2.1 –
Alarms
for more information. If an alarm occurs, the
Alarm
indicator (on the front of the Ericsson W3x) is blinking
and a message is also sent to the Event log. See section 3.10 –
Event
Log
.
Page 25 / 98
Configuration and Management
1/1551-CRH 102 168 Uen Rev A
2008-12-16
19
The “NETWORK INFORMATION” section where the most important
connection status information is collected. This information (among
others) is also found on the
Internet
and
LAN
web pages respectively.
3.2.1
Alarms
The “ALARMS” section on the
Overview
page includes detected active
error conditions.
Events that generate an alarm are such that make it impossible to send or
receive data, e.g. SIM card missing.
If there are no alarms currently detected the text "
No alarms detected
"
is displayed. If an alarm is detected, the
Alarm
indicator on the
Ericsson W3x front panel is blinking, and the corresponding cause is
displayed according to the table below:
Table 6 - Alarm cause description
Alarm cause
Description
No SIM card detected
There is no SIM card inserted, or the
SIM card is not correctly inserted.
Invalid SIM card
inserted
The inserted SIM card is invalid
No PIN code entered
No PIN code has been entered to
activate the Internet and voice services.
Incorrect PIN code
entered
The entered PIN code is incorrect.
SIM card blocked
The SIM card has been blocked (due to
entering the wrong PIN code three
times). The PUK is required to unblock
the SIM card.
SIM card permanently
blocked
The SIM card has been permanently
blocked (due to entering the wrong PUK
code ten times). A new SIM card is
required.
No Auto APN was found
The APN (Access Point Name) could
not be automatically configured based
on information on the SIM card.
Alarm detection not
working
The alarm detection function is currently
not working.
Unknown alarm
An alarm that cannot be identified has

Rate

4.5 / 5 based on 2 votes.

Popular Ericsson Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top