1. Home
    2. /
  2. Manuals
    3. /
  3. Ericsson
    4. /
  4. W35
    5. /
  5. 4
Page 16 / 98 Scroll up to view Page 11 - 15
W3x Series Overview
10
1/1551-CRH 102 168 Uen Rev A
2008-12-16
2.5.3
Right Side Interface
The right side of the Ericsson W3x is equipped with an antenna connector
(type MCX) for connecting an optional external antenna.
Figure 6 – Ericsson W3x right side
2.5.4
Front Panel
The front panel of the Ericsson W3x includes a signal quality indicator, LED
indicators and a Standby button as described below.
2.5.4.1
Signal Quality Indicator
The signal quality indicator shows the quality of the signal from the mobile
network. The more segments displayed in the bar graph, the stronger the
signal.
The symbol in the centre of the graph (
) is blinking when searching for
a mobile network connection and when a connection is established, it
indicates the following:
•
When
3G
is displayed there is a connection to a UMTS network.
•
3G
with a
+
sign indicates connection to a HSPA network.
•
When the 3G symbol is
unlit
and the segment bar displays signal,
there is a connection to a GSM/GPRS/EDGE (2G) network.
Page 17 / 98
W3x Series Overview
1/1551-CRH 102 168 Uen Rev A
2008-12-16
11
2.5.4.2
W30 LED Indicators
The following LED indicators are visible on the front of the Ericsson W30:
Figure 7 - Ericsson W30 LED indicators
Table 4 – Description of Ericsson W30 LED indicators
Symbol
Color
Description
Blinking
(blue)
Off
Various alarm conditions exist that
makes it impossible to establish a
connection to the mobile network (and
Internet). Information is specified on the
“Overview” web page.
No alarms.
On (blue)
Off
The Wireless LAN is activated.
The Wireless LAN is not activated.
On (blue)
Off
A connection to Internet is established.
No Internet connection is established.
Page 18 / 98
W3x Series Overview
12
1/1551-CRH 102 168 Uen Rev A
2008-12-16
2.5.4.3
W35 LED Indicators
The following LED indicators are visible on the front of the Ericsson W35:
Figure 8 - Ericsson W35 LED indicators
Table 5 – Description of Ericsson W35 LED indicators
Symbol
Color
Description
Blinking
(blue)
Off
New voice mail message(s) is available.
No voice mail message(s) is available.
Blinking
(blue)
Off
Various alarm conditions exist that
makes it impossible to establish a
connection to the mobile network (and
Internet). Information is specified on the
“Overview” web page.
No alarms.
On (blue)
Off
The Wireless LAN is activated.
The Wireless LAN is not activated.
On (blue)
Off
A connection to Internet is established.
No Internet connection is established.
On (blue)
Off
A connected telephone is off-hook.
A connected telephone is on-hook.
Page 19 / 98
W3x Series Overview
1/1551-CRH 102 168 Uen Rev A
2008-12-16
13
2.5.4.4
Built-in Ethernet Indicators
The Ethernet LAN connectors (
Ethernet 1-4
) have two built-in indicators
each.
The left indicator shows the speed of data traffic between the Ericsson W3x
and the connected client. If the speed is 100 Mbps, the indicator is green.
When the indicator is unlit, the speed is 10 Mbps.
The indicator to the right is yellow when a LAN connection is established
and flashes to show data traffic activity.
2.5.4.5
Standby Button
The Standby
button at the bottom of the front shows steady blue when
the Ericsson W3x has finished the start-up procedure.
The button can be pressed to switch the Ericsson W3x to a standby (low-
power) mode (equal to when the Ericsson W35 is running on optional
battery power). The button shows red when the unit is in standby mode and
only phone services are available.
Page 20 / 98
Configuration and Management
14
1/1551-CRH 102 168 Uen Rev A
2008-12-16
3
Configuration and Management
When the physical installation of the Ericsson W3x is finished (as described
in the
Quick Installation Guide
), the internal Web User Interface (WUI) is
available for configuration and status control.
This chapter provides detailed information about configuration options and
management of the Ericsson W3x using the WUI.
The WUI is available in five languages; English, German, Spanish, French
and Italian. Each page in the WUI includes country flags for the supported
languages:
Click on a flag to change to the preferred language.
3.1
Access and Login to the Web User Interface
The WUI can be accessed locally from a PC connected to either an
Ethernet LAN port or to the wireless LAN interface.
Note:
First time setup must be done via an Ethernet port as the wireless
LAN interface in the Ericsson W3x is disabled by default.
When accessing the web pages, the following web browsers are supported:
•
Internet Explorer® 5.0 or higher
•
Safari® 1.3 or higher
•
Firefox® 1.0 or higher
•
Opera® 8 or higher
Start a web browser on a PC connected to the Ericsson W3x and type
http://mbr
or
in the
Address
(URL) field.
Note:
If you change the internal IP address (192.168.1.1) on the Ericsson
W3x, you have to use the new address to access the web pages.
A start page is displayed in one of the following appearances depending on
the operational status of the Ericsson W3x described in section 3.1.1 and
3.1.2.

Rate

4.5 / 5 based on 2 votes.

Popular Ericsson Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top