1. Home
    2. /
  2. Manuals
    3. /
  3. Ericsson
    4. /
  4. W35
    5. /
  5. 14
Page 66 / 98 Scroll up to view Page 61 - 65
Configuration and Management
60
1/1551-CRH 102 168 Uen Rev A
2008-12-16
Figure 46 - Software update complete
Click the
Close window
button to close the window. The following page is
displayed:
Figure 47 - Software update complete page
Click the
Restart
button to restart the Ericsson W3x.
3.9.5
Factory Reset
The Ericsson W3x configuration can be reset to its factory default settings
from the
System
page.
Note:
If the WUI is not accessible, a reset to factory default settings can
also be done using the Reset button on the unit. See section 7.2 –
Reset to Factory Default Settings
.
To reset the configuration to factory default settings, click
Reset
in the
“FACTORY RESET” section on the
System
page.
Note:
This procedure resets ALL configurable values back to default
settings, including the login password (
user
).
Before the reset starts, you will get the following question:
Page 67 / 98
Configuration and Management
1/1551-CRH 102 168 Uen Rev A
2008-12-16
61
Click
OK
to start the reset or
Cancel
to abort the reset and return to the
System
page.
Page 68 / 98
Configuration and Management
62
1/1551-CRH 102 168 Uen Rev A
2008-12-16
3.10
Event Log
On the
Event Log
page, a list of the events that has been sent to the log
on the Ericsson W3x is displayed:
Figure 48 - Event Log page
Each row in the log list displays the time and date when an event was
reported to the log, the type of the event, and a brief statement indicating its
cause.
Note:
If the actual time is not available, the timestamp is set to “Jan 1
00:00:00” when the Ericsson W3x is restarted. This will change to
actual time when available.
Page 69 / 98
Configuration and Management
1/1551-CRH 102 168 Uen Rev A
2008-12-16
63
The system logging information is written to 3 files in the system and these
files are rotated in a circular fashion. The files are not saved to flash
memory and will be lost when rebooting the system or when power is
disconnected.
To view only a selection of the log events in the list, select a filter level from
the “Display”
list. Available log levels are “Alarms only” and “All”. The
“Alarms only” log level corresponds to the
Alarm
indicator on the
Ericsson W3x and the information in the “ALARMS” section on the
Overview
page.
Click
Refresh
to update the list with new information. The most recent log
events are listed at the bottom of the list.
3.10.1
Persistent Logging
If persistent logging is enabled, the log files are written to flash memory in
two alternating files meaning they will remain after a system restart or
power failure.
Note:
Persistent logging should only be used for debugging purposes
since it consumes flash memory.
To enable this feature, select the “Persistent logging” check box on the
Event Log
page and click
Apply
to save the setting.
3.11
Change Password
On the
Change Password
page the password used for logging in to the
web pages can be changed. For security reasons you are recommended to
change the preconfigured password.
Page 70 / 98
Configuration and Management
64
1/1551-CRH 102 168 Uen Rev A
2008-12-16
Figure 49 - Change Password page
Type the current password in the “Current Password” field. If it is the first
time you change the password, the password is
user
.
Type a new password in the “New Password” and “Retype New Password”
fields. A password can include up to 64 characters (letters and/or
numbers).
Note:
The password is case-sensitive (distinguish between uppercase
and lowercase letters).
Save the new password by clicking
OK
.
3.12
Logout
To logout from the Ericsson W3x web pages, click
Logout
in the left-hand
menu. When the logout is completed, the
Enter password
page is
displayed.

Rate

4.5 / 5 based on 2 votes.

Popular Ericsson Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top