80

2.

Pin Code Method

Note the Pin code of your TRAVEL ROUTER device.

Please use this Pin code to initialize the WPS process from the wireless client configuration utility.

This process will be different for each brand or model. Please consult the user manual of the wireless client for more information.

81

Client List

This page shows the wireless clients that are connected to the TRAVEL ROUTER device.

82

Policy

This page allows you to configure the access policies for each SSID (wireless network).

Policy

WAN Connection:

Allow wireless clients on this SSID to access the WAN port which typically is an Internet

connection.

Communication between Wireless clients:

Whether each wireless client can communicate with each other in this SSID. When Disabled, the

wireless clients will be isolated from each other.

Communication between Wireless clients

and Wired clients.

Whether wireless clients on this SSID can communicate with computers attached to the wired

LAN port.

83

8.2.4

Firewall

The Internet section allows you to set the access control and Firewall settings.

Enable

This page allows you to Enable / Disable the Firewall features.

When Enabled, Denial of Service (DoS) and SPI (Stateful Packet Inspection) features are also be enabled.

84

Advanced

You can choose whether to allow VPN (Virtual Private Network) packets to pass through the Firewall.