Page 76 / 94
Scroll up to view Page 71 - 75
76
- Reset
You can reset the broadband router when system stops responding correctly
or stop functions.
Downloaded from
www.Manualslib.com
manuals search engine
Page 77 / 94
77
13
Repeater Mode
Repeater mode has limited settings compared to the AP mode. Choose
“Repeater mode” on the top right corner of the configuration page.
System restarts and connects to the IP address
You will see the configuration homepage under “
REPEATER
” mode now.
±
System
- Status
System status section allows you to monitor the current status of your router.
You can see the Uptime, hardware information, serial number as well as firmware
version information.
LAN Settings:
This page displays the Broadband router LAN port’s current LAN &
WLAN information.
Downloaded from
www.Manualslib.com
manuals search engine
Page 78 / 94
78
WLAN Settings:
Wireless configuration details such as SSID, Security settings,
BSSID, Channel number, mode of operation are briefly shown.
- LAN
The LAN Tabs reveals LAN settings which can be altered at will. If you are an
entry level user, try accessing a website from your browser. If you can access
website without a glitch, just do not change any of these settings.
Click
<Apply>
at the bottom of this screen to save the changed configurations.
IP address:
It is the router’s LAN IP address (Your LAN clients default gateway IP
address). It can be changed based on your own choice.
IP Subnet Mask:
Specify a Subnet Mask for your LAN segment.
Downloaded from
www.Manualslib.com
manuals search engine
Page 79 / 94
79
802.1d Spanning Tree:
This is disabled by default. If 802.1d Spanning Tree
function is enabled, this router will use the spanning
tree protocol to prevent network loops.
- Schedule
Add schedule, edit schedule options allow configuration of power savings services.
Fill in the schedule and select type of service. Click
<Apply>
to implement the
settings.
The schedule table lists the pre-schedule service-runs. You can select any of
them using the check box.
Downloaded from
www.Manualslib.com
manuals search engine
Page 80 / 94
80
- Event Log
View operation
log of ESR-9753
. This page shows the current system log of
the Broadband router. It displays any event occurred after system start up. At the
bottom of the page, the system log can be saved
<Save>
to a local file for further
processing or the system log can be cleared
<Clear>
or it can be refreshed
<Refresh>
to get the most updated information. When the system is powered
down, the system log will disappear if not saved to a local file.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live