Page 66 / 94
Scroll up to view Page 61 - 65
66
Bandwidth Allocation:
This can reserve / limit the throughput of specific protocols and port range.
You can set the upper bound and Lower bound.
Type:
Specify the direction of packets. Upload, download or both.
IP range:
Specify the IP address range. You could also fill one IP address
Protocol:
Specify the packet type. The default ALL will put all packets in the QoS
priority Queue.
Port range:
Specify the Port range. You could also fill one Port.
Policy:
Specify the policy the QoS,
Min
option will reserve the selected data rate
in QoS queue.
Max
option will limit the selected data rate in QoS queue.
Rate:
The data rate of QoS queue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 67 / 94
67
Disabled:
This could turn off QoS feature.
- Routing
You can set enable Static Routing to let the router forward packets by your routing
policy.
Destination LAN IP:
Specify the destination LAN IP address of static routing rule.
Subnet Mask:
Specify the Subnet Mask of static routing rule.
Default Gateway:
Specify the default gateway of static routing rule.
Hops:
Specify the Max Hops number of static routing rule.
Interface:
Specify the Interface of static routing rule.
Downloaded from
www.Manualslib.com
manuals search engine
Page 68 / 94
68
±
TOOLS Settings
- Admin
You can change the password required to log into the broadband router's
system web-based management. By default, the password is: admin. Passwords
can contain 0 to 12 alphanumeric characters, and are case sensitive.
Old Password:
Fill in the current password to allow changing to a new password.
New Password:
Enter your new password and type it again in
Repeat New
Password
for verification purposes
Downloaded from
www.Manualslib.com
manuals search engine
Page 69 / 94
69
Remote managemen
t
This allows you to designate a host in the Internet the ability to configure
the Broadband router from a remote site. Enter the designated host IP
Address in the Host IP Address field.
Host Address:
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from
a remote site. If the Host Address is left 0.0.0.0 this means
anyone can access the router’s web-based configuration from a
remote location, providing they know the password.
Port:
The port number of the remote management web interface.
Enabled:
Check to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
Downloaded from
www.Manualslib.com
manuals search engine
Page 70 / 94
70
- Time
The Time Zone allows your router to reference or base its time on the settings
configured here, which will affect functions such as Log entries and Firewall
settings.
Time Setup:
Synchronize with the NTP server
Time Zone:
Select the time zone of the country you are currently in. The router
will set its time based on your selection.
NTP Time Server:
The router can set up external NTP Time Server.
Daylight Savings:
The router can also take Daylight Savings into account. If you
wish to use this function, you must select the Daylight
Savings Time period and check/tick the enable box to enable
your daylight saving configuration.
Click
<Apply>
at the bottom of the screen to save the above configurations.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live