Page 21 / 94
Scroll up to view Page 16 - 20
21
Enter the name for your wireless network (SSID) and security key
Click
<Next>
to proceed
To apply the entire configuration, click
<Reboot>
.
NOTE:
After Wireless settings are applied, you need to connect from your
WLAN client with the security settings you just finished configuring.
Remember the type of security & security key.
Page 22 / 94
22
11 Initial Setup ESR-9752
ESR-9752 uses web-interface for configuration to be accessed through your
web browser, such as Internet Explorer or Firefox.
- LOGIN Procedure
1.
OPEN your browser (e.g. Internet Explorer).
2. Type
in address bar and hit [Enter] button on your
keyboard.
Page 23 / 94
23
3. Click
<OK>
to navigate into ESR-9752 configuration home page.
4.
You will see the home page of ESR-9752 as follows.
Page 24 / 94
24
12
AP Router Mode
±
System
- Status
This page allows you to monitor the current status of your router.
System:
You can see the Uptime, hardware information, serial number as well
as firmware version information.
WAN Settings:
This section displays whether the WAN port is connected to a
Cable/DSL connection. It also displays the router’s WAN IP
address, Subnet Mask, ISP Gateway, MAC address, and
Primary DNS.
Page 25 / 94
25
LAN Settings:
This section displays the Broadband router LAN port’s current
information. It also shows whether the DHCP Server function is
enabled / disabled.
WLAN Settings:
This section displays the current WLAN configuration settings.
Wireless configuration details such as SSID, Security
settings, BSSID, Channel number and mode of operation are
briefly shown.
19216811.live