eHome EH100 Router Manual PDF (Setup & Configuration Guide)

Page 51 / 92 Scroll up to view Page 46 - 50

´1

eHome EH100 User Manual

Section ² - Conﬁguration

To use the Universal Plug and Play

(UPnP

™

) feature click on

Enabled

. UPNP

provides compatibility with networking

equipment, software and peripherals.

Unchecking the box will not allow the

EH100 to respond to pings. Blocking the

Ping may provide some extra security

from hackers. Check the box to allow the

WAN port to be “pinged”.

You may set the port speed of the WAN

port to 10Mbps, 100Mbps, or auto. Some

older cable or DSL modems may require

you to set the port speed to 10Mbps.

Gaming mode allows a form of pass-

through for certain Internet Games. If

you are using Xbox, Playstation2 or a

PC, make sure you are using the latest

ﬁrmware and Gaming Mode is enabled.

To utilize Gaming Mode, click the box. If

you are not using a Gaming application,

it is recommended that you Disable

Gaming Mode.

Check the box to allow multicast trafﬁc

to pass through the router from the

Internet.

UPnP Settings:

WAN Ping:

WAN select to

10/100 Mbps:

Gaming Mode:

Multicast

streams:

Page 52 / 92

´±

eHome EH100 User Manual

Section ² - Conﬁguration

Tools

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are two accounts that can access the management interface through the web browser. The accounts are admin

and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot

make any changes. Only the admin account has the ability to change both admin and user account passwords.

Page 53 / 92

´²

eHome EH100 User Manual

Section ² - Conﬁguration

Administrator

Password:

Enter the new password for the

Administrator login. The administrator

can make changes to the settings.

User Password:

Enter the new password for the User

login. If you login as the User, you can

only see the settings, but cannot change

them.

Remote

Management:

Remote management allows the EH100

to be configured from the Internet

by a web browser. A username and

password is still required to access the

Web-Management interface. In general,

only a member of your network can

browse the built-in web pages to perform

Administrator tasks. This feature enables

you to perform Administrator tasks from

the remote (Internet) host.

IP Address:

The Internet IP address of the computer that has access to the Broadband Router. If you input an asterisk (*) into this

ﬁeld, then any computer will be able to access the Router. Putting an asterisk (*) into this ﬁeld would present a security

risk and is not recommended.

Port:

The port number used to access the EH100.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the EH100 and 8080 is the port used for the

Web-Management interface.

Page 54 / 92

´³

eHome EH100 User Manual

Section ² - Conﬁguration

Time Settings

This page contains options for setting the time on the EH100 router.

You can synchronize the router with an NTP

server to update the time or set the time

manually.

The EH100 has support for

daylight savings.

Time Zone:

Select the Time Zone from the

drop-down menu.

Daylight Saving:

Check the box to enable Daylight

Saving Time. Enter a start date

and an end date for daylight saving

time.

Automatic:

NTP is short for Network Time

Protocol. NTP synchronizes

computer clock times in a network of

computers. This ﬁeld is optional.

To manually input the time, enter

the values in these ﬁelds for the

Year, Month, Day, Hour, Minute,

and Second. Click Set Time.

Manual:

Page 55 / 92

´´

eHome EH100 User Manual

Section ² - Conﬁguration

System Settings

Use this option to save the current

router conﬁguration settings to a ﬁle

on the hard disk of the computer

you are using. First, click the

Save

button. You will then see a ﬁle dialog,

where you can select a location and

ﬁle name for the settings.

Use this option to load previously

saved router conﬁguration settings.

First, click the

Browse

control

to find a previously save file of

conﬁguration settings. Then, click

the

Load

button to transfer those

settings to the router.

This option will restore all

conﬁguration settings back to the

settings that were in effect at the

time the router was shipped from

the factory. Any settings that have

not been saved will be lost, including

any rules that you have created. If you want to save the current router conﬁguration settings, click the

Save

button above.

Reboots the EH100.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to Factory

Default Settings:

Reboot:

Rate

Popular eHome Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share