Page 126 / 190 Scroll up to view Page 121 - 125
All MAC address entries will be listed in this page:
To delete one or more entries listed here, please check the box of the entry you wish to
delete (Under ‘Select’), and click ‘Delete Selected’ button. If you wish to delete all mapping
entries, click ‘Delete All’ button.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Page 127 / 190
3
2
4 WPS (Wi
Fi Protected Setup) Settings
WPS (Wi
Fi Protected Setup) provides a convenient way to establish the connection
between this broadband router and wireless clients. Any WPS
compatible wireless clients
can establish secure connection with this broadband router with simple push
button type
configuration or PinCode type configuration.
Here are descriptions of every setup item:
Item Name
Description
Enable WPS
Check this box to enable WPS function,
uncheck it to disable WPS.
WPS Status
If the wireless security (encryption) function of
this wireless router is properly set, you’ll see
‘Configured’ message here. If wireless security
function has not been set, you’ll see
‘unConfigured’.
Self PIN code
This is the WPS PIN code of this wireless
router. This code is useful when you need to
Page 128 / 190
build wireless connection by WPS with other
WPS
enabled wireless devices.
SSID
The SSID of this wireless router will be
displayed here.
Authentication Mode
The wireless security authentication mode of
this wireless router will be displayed here.
Passphrase Key
The WPA passphrase will be displayed as
asterisk here.
Config Mode
Select the WPS configuration role of this
broadband router.
Registrar: This broadband router will act as
WPS registrar and wait for wireless clients to
send WPS configuration request.
Enrollee: This broadband router will act as
WPS enrollee and send WPS configuration
request to other WPS registrar.
Configure via Push
Button
Click ‘Start PBC’ to start Push
Button type WPS
configuration (PBC). Please push the WPS
push
button on other WPS
compatible
network devices to begin WPS configuration.
You can also push the ‘WPS / Reset’ button
located at the back of this broadband router to
start PBC without using web configuration
interface.
Configure via Client
PinCode
Please input the PinCode displayed at the
configuration software of WPS
enabled
Page 129 / 190
wireless client, and click ‘Start PIN’ to establish
connection with the wireless client.
Page 130 / 190
3
5 Advance Settings
This router provides various network functionalities like QoS and DDNS, and you can
configure these functions in ‘Advanced Settings’ menu.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top