EDIMAX BR-6208AC Router Manual PDF (Setup & Configuration Guide)

Page 46 / 167 Scroll up to view Page 41 - 45

42

III-2.

Save Settings

1.

After you configure any settings, click the “Save Settings” button at the

bottom of the screen to save your changes.

The device needs to restart in order to bring any changes into

effect.

2.

Then, click “

c

lick here to restart” in order to restart the device and

bring

the changes into effect.

3.

To make several changes at once,

use the “Save Settings” button after

each change and then click

“click here to restart” after your final change.

Only one restart is necessary as long as each change is saved with the “Save

Settings” button.

After you click “click here to restart”, all saved changes will come

into effect.

Page 47 / 167

43

III-3.

Main Menu

The mai

n menu displays different options depending on your device’s

operating mode.

For

Range Extender mode: WPS

please refer to

2.4GHz Wireless &

5GHz Wireless



WPS

Wi-Fi Router

Access Point

Range Extender

Wireless Bridge

WISP

Page 48 / 167

44

III-3-1. Status

The “Status” page displays basic s

ystem information

about the device, arranged into categories.

Screenshots displayed are examples.The information shown on

your screen will vary depending on your configuration.

Page 49 / 167

45

III-3-2. Setup Wizard

You can run the setup wizard again to reconfigure the

basic settings of the device, or you can run a wizard to

help you switch the device to a different operating mode. Select “Setup

Wizard” or “Switch to Router/A

ccess Point/Range Extender/Wireless

Bridge/WISP mode

” and then click “Run Wizard” to begi

n.

Setup Wizard

This wizard will help you to set up the basic

functions and settings of the device. For

guidance about using the setup wizard, please

refer to

II. Installation

.

Switch to Router/Access

Point/ Range Extender/

Wireless Bridge/ WISP

mode

This wizard will help you to switch the device

to a different operating mode: Wi-Fi router

mode, access point mode, range extender,

wireless bridge, or WISP mode (see below).

Switch to Router/Access Point/ Range Extender/ Wireless Bridge/ WISP

mode:

1.

Follow the on-screen instructions to back up your current settings and

then reset the device back to its factory default settings.

2.

After the device has reset you will see the screen below. Close your

browser and open it again.

Page 50 / 167

46

3.

Follow the on-screen wizard to setup your device in a different mode.

Refer to

II. Installation Step 3

onwards for help if needed.

If you don’t see the

“Get Started”

screen, try reconnecting to the

edimax.setup

SSID and go to

http://edimax.setup

in a web

browser.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share