Page 26 / 92
Scroll up to view Page 21 - 25
26
3.
Please ensure all hardware is correctly installed. Check the box and click
“Next”
.
Page 27 / 92
27
4.
Select your country and ISP.
If your ISP is not listed, select “Other” from the
list and refer to
4.2. Internet Connection Type.
5.
En
ter your ISP’s username and password and click “Apply”. On the next
screen, click “Apply” again.
Page 28 / 92
28
6.
Please wait while the router connects to the Internet. When the router is
connected successfully, you will see the screen below.
Page 29 / 92
29
4.2.
Internet Connection Type
If your
country or ISP is not listed, please select “
Other
” from the list
.
Page 30 / 92
30
Then select your Internet connection type
and click “Next”
.
If you are not
sure, please contact your Internet Service Provider (ISP).
Depending on your selection, please refer to the appropriate chapter:
4.2.1. PPPoE/PPPoA
4.2.2. Bridge Mode
4.2.3. Dynamic IP Address
4.2.4. Static IP
Parameter
Description
PPPoE/PPPoA
PPPoE (PPP over Ethernet) and PPPoA (PPP
over ATM) are common connection methods
used for xDSL.
Bridge Mode
Bridge Mode is a common connection method
used for xDSL modems.
Dynamic IP
Address
Obtain an IP address automatically from your
service provider.