EDIMAX AR-7286WnA Router Manual PDF (Setup & Configuration Guide)

Page 56 / 92 Scroll up to view Page 51 - 55

56

Field

Description

Enable

DHCP in local pools. Choose

DHCP

or

SLAAC

.

DHCP PD Enable

IPv6 Prefix Delegation Options for DHCPv6. You may

enable or disable DHCP PD.

MLD Proxy

You may enable or disable MLD Proxy. MLD proxy is

enabled only for route mode.

It works in an IPv6

environment.

Dual Stack Lite

Enable

You may

Enable

or

Disable

the Dual Stack Lite. The

ADSL Router support IPv4/v6 Dual Stack Internet

Protocol.

Select

Bridge Mode

in the

ISP

encapsulation if you want to use pass-through

transmission mode.

Field

Description

Dual Stack Lite

Enable

You may

Enable

or

Disable

the Dual Stack Lite. The

ADSL Router supports IPv4/v6 Dual Stack Internet

Protocol.

Encapsulation

You can choose

1483

Bridged IP LLC

or

1483

Bridged

IP VC-Mux

.

Page 57 / 92

57

After finishing, click

SAVE

to apply the settings of this PVC.

5.4.2.

LAN

Choose

Interface Setup

>

LAN

. The

LAN

page that is displayed contains

Router Local IP

,

DHCP Server

,

DNS

,

Radvd and DHCPv6

. In this page, you can

change the IP address of the router. The default IP address is 192.168.2.1,

which is the private IP address of the router.

The following table describes the parameters of this page:

Field

Description

Main IP

Address

Enter

the

IP

address

of

LAN

interface.

It

is

recommended to use an address from a block reserved

for private use. This address block is 192.168.1.1-

192.168.255.254.

Main Subnet

Enter the subnet mask of LAN interface. The range of

Page 58 / 92

58

Field

Description

Mask

subnet mask is from 255.255.0.0 to 255.255.255.254.

Alias IP

Address

You may enter the second IP Address.

Alias Subnet

Mask

You may enter a second subnet mask.

Dynamic

Route

You can select

RIP1

,

RIP2-B

or

RIP2-M

.

Direction

You can select

None

,

Both

,

IN Only

or

OUT Only

.

Multicast

IGMP

(Internet Group Multicast Protocol) is a session-

layer protocol used to establish membership in a

multicast group. The ADSL Router supports both IGMP

version 1 (

IGMP v1

) and IGMP version 2 (

IGMP v2

).

Select

Disabled

to disable it.

IGMP Snoop

You may select

Enabled

or

Disabled

. After activating this

function, the packets of the IGMP broadcast will not be

sent to the LAN interface not belonging to the group.

DHCP

You can choose

Disabled

,

Enabled

or

Relay

. If set to

DHCP Server

, the router can assign IP addresses, IP

default gateway and DNS Servers to the host under

Windows95, Windows NT and other operating systems

that support the DHCP client.

Starting IP

Address

The starting IP address for the DHCP server's IP

assignment.

IP Pool Count

The max user pool size.

Lease Time

The lease time determines the period that the host

retains

the

assigned

IP

addresses

before

the

IP

addresses change. The default is 259200 seconds.

Physical Ports

When no port is selected

, the LAN PC can’t get

an IP

from the router.

DNS Relay

You can choose

Use Auto Discovered DNS Server Only

or

Use User Discovered DNS Server Only

. If you select

Page 59 / 92

59

Field

Description

Auto Discovered

, the router accepts the firstly-received

DNS assignment from one of the PPPoA, PPPoE or MER

enabled PVC(s) during the connection establishment. If

select

User Discovered

, enter the IP addresses of the

primary and secondary DNS servers.

Primary DNS

Server

DNS server FOR wan and LAN

Secondary

DNS Server

DNS server FOR wan and LAN

Radvd Enable

You may choose to enable or disable Radvd. The Router

Advertisement Daemon (Radvd) is an open-source

software product that implements link-local

advertisements of IPv6 router addresses and IPv6

routing prefixes using the Neighbor Discovery Protocol

(NDP).

Radvd Mode

You may choose

Auto

or

Manual

.

Auto Prefix

Select

Enable

or

Disable

.

RA Flag Set

You may choose

ManagedAddr

or

Other Config

.

DHCP6 Server

You may choose to enable or disable DHCP6 Server.

DHCP6 Mode

You may choose

Auto

or

Manual

for the DHCP6 Server.

Dynamic Host Configuration Protocol (DHCP) allows the individual PC to

obtain the TCP/IP configuration from the centralized DHCP server. You can

configure this router as a DHCP server or disable it. The DHCP server can

assign IP address, IP default gateway and DNS server to DHCP clients. This

router can also act as a surrogate DHCP server (DHCP proxy) where it relays

IP address assignment from an actual DHCP server to clients. You can enable

or disable DHCP server or DHCP proxy.

In the

DHCP

field, choose

Disabled

, the page shown in the following figure

appears.

Page 60 / 92

60

In the

DHCP

field, choose

DHCP Relay

, the page shown in the following figure

appears. Enter a server IP address running on WAN side.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share