1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. VigorPro 5300
    5. /
  5. 54
Page 266 / 304 Scroll up to view Page 261 - 265
VigorPro5300 Series User’s Guide
258
4.
A
Re-login
page will be shown on the screen. Please type new account and password
that you created previously. And click
Login
.
5.
The following page will be shown automatically. You will find there are two devices
service added to your router. If you activated only one service before, it must be only
one service displayed here. In this case, DT-DT and DT-KL services are registered on
the VirgorPro website. However, DT-DT service is installed into the router at present.
Page 267 / 304
VigorPro5300 Series User’s Guide
259
6.
Click the
On
button on the line with DT-KL service to use that service. Then, the
Status light for DT-DT service will be changed into red which means you can press on
the
On
button for that one to use it for next time.
7.
Now, you have successfully switched the service provider for your router.
4.8 Enabling Anti-Virus/Anti-Intrusion/Anti-Spam
After applying an account, registering your account and router, you have to access into the
web page of Vigor router to enable Anti-Virus/Anti-Intrusion functions. There are two ways
to enable it.
A.
For the default rule of firewall, please open
Firewall>>General Setup
page. Check the
box of
Enable
for Anti-Intrusion and choose proper action (profile) from the drop down
list of Anti-Virus and Anti-Spam. Next, click
OK
to finish the procedure of activation.
B.
For specified filter rule (there are twelve filter sets in Firewall, and each set is allowed to
set seven filter rules), please check the box of
Enable
for Anti-Intrusion and choose
proper action (profile) from the drop down list of Anti-Virus. Next, click
OK
to finish
the procedure of activation.
Page 268 / 304
VigorPro5300 Series User’s Guide
260
If you
did not
check the Anti-Intrusion box and choose a proper profile for
Anti-Virus/Anti-Spam, you still
cannot use
the Anti-Intrusion/Anti-Virus/Anti-Spam
function even if you finished all the relational profiles.
Page 269 / 304
VigorPro5300 Series User’s Guide
261
5
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
a
a
n
n
d
d
E
E
x
x
a
a
m
m
p
p
l
l
e
e
s
s
5.1 Create a LAN-to-LAN Connection Between Remote Office
and Headquarter
The most common case is that you may want to connect to network securely, such as the
remote branch office and headquarter. According to the network structure as shown in the
below illustration, you may follow the steps to create a LAN-to-LAN profile. These two
networks (LANs) should NOT have the same network address.
Settings in Router A in headquarter:
1.
Go to
VPN and Remote Access
and select
Remote Access Control
to enable the
necessary VPN service and click
OK
.
2.
Then,
For using
PPP
based services, such as PPTP, L2TP, you have to set general settings in
PPP General Setup
.
Page 270 / 304
VigorPro5300 Series User’s Guide
262
For using
IPSec
-based service, such as IPSec or L2TP with IPSec Policy, you have to
set general settings in
IPSec General Setup
, such as the pre-shared key that both
parties have known.
3.
Go to
LAN-to-LAN
. Click on one index number to edit a profile.
4.
Set
Common Settings
as shown below. You should enable both of VPN connections
because any one of the parties may start the VPN connection.
5.
Set
Dial-Out Settings
as shown below to dial to connect to Router B aggressively with
the selected Dial-Out method.
If an
IPSec-based
service is selected, you should further specify the remote peer IP
Address, IKE Authentication Method and IPSec Security Method for this Dial-Out
connection.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top