1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. VigorPro 5300
    5. /
  5. 34
Page 166 / 304 Scroll up to view Page 161 - 165
VigorPro5300 Series User’s Guide
158
Regional
This page allows you to process incoming or outgoing phone calls by regional. Default
values (common used in most areas) will be shown on this web page. You
can change
the
number based on the region that the router is placed.
Last Call Return [Miss]
Sometimes, people might miss some phone calls. Please dial
number typed in this field to know where the last phone call
comes from and call back to that one.
Last Call Return [In]
You have finished an incoming phone call, however you want
to call back again for some reason. Please dial number typed
in this field to call back to that one.
Last Call Return [Out]
Dial the number typed in this field to call the previous
outgoing phone call again.
Call Forward [All][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place.
Call Forward [Deact]
Dial the number typed in this field to release the call forward
function.
Page 167 / 304
VigorPro5300 Series User’s Guide
159
Call Forward [Busy][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while the phone is busy.
Call Forward [No Ans][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while there is no answer of the
connected phone.
Do Not Disturb [Act]
Dial the number typed in this field to invoke the function of
DND.
Do Not Distrub [Deact]
Dial the number typed in this field to release the DND
function.
Hide caller ID [Act]
Dial the number typed in this field to make your phone
number (ID) not displayed on the display panel of remote end.
Hide caller ID [Deact]
Dial the number typed in this field to release this function.
Call Waiting [Act]
Dial the number typed in this field to make all the incoming
calls waiting for your answer.
Call Waiting [Deact]
Dial the number typed in this field to release this function.
Block Anonymous[Act]
Dial the number typed in this field to block all the incoming
calls with unknown ID.
Block Anonymous[Deact]
Dial the number typed in this field to release this function.
Block Unknown Domain
[Act]
Dial the number typed in this field to block all the incoming
calls from unknown domain.
Block Unknown Domain
[Deact]
Dial the number typed in this field to release this function.
Block IP Calls [Act]
Dial the number typed in this filed to block all the incoming
calls from IP address.
Block IP Calls [Deact]
Dial the number typed in this field to release this function.
Block Last Calls [Act]
Dial the number typed in this field to block the last incoming
phone call.
3.12.2 SIP Accounts
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an
Account Name
or user name,
SIP Registrar, Proxy,
and
Domain name
. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in
Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to
the destination using AccountName@Domain/Realm as identity.
Page 168 / 304
VigorPro5300 Series User’s Guide
160
Index
Click this link to access into next page for setting SIP account.
Profile
Display the profile name of the account.
Page 169 / 304
VigorPro5300 Series User’s Guide
161
Domain/Realm
Display the domain name or IP address of the SIP registrar
server.
Proxy
Display the domain name or IP address of the SIP proxy
server.
Account Name
Display the account name of SIP address before @.
Ring Port
Specify which port will ring when receiving a phone call. Set
Phone1, Phone2, ISDN1-S0 or ISDN-TE as the default ring
port for the SIP account. If you choose Phone1, Phone2 or
ISDN1-S0, the ISDN2-TE selection will be dimmed, vice
versa. There are ten internal lines with numbers (30 – 39)
offered for
ISDN-S0
.
You can specify any one of them as ring
port for specified SIP account. By the way, ISDN-S0 can be
used by mapping with MSN numbers.
STUN Server
Type in the IP address or domain of the STUN server.
External IP
Type in the gateway IP address.
SIP PING interval
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Status
Show the status for the corresponding SIP account.
R
means
such account is registered on SIP server successfully.
–
means
the account is failed to register on SIP server.
Profile Name
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain
name is
draytel.org
, then you might set
draytel-1
in this field.
Register via
If you want to make VoIP call without register personal
information, please choose
None
and check the box to achieve
the goal.
Some SIP server allows user to use VoIP function
without registering. For such server, please check the box of
Call without registration
. Choosing
Auto
is recommended.
Page 170 / 304
VigorPro5300 Series User’s Guide
162
The system will select a proper way for your VoIP call.
SIP Port
Set the port number for sending/receiving SIP message for
building a session. The default value is
5060.
Your peer must
set the same value in his/her Registrar.
Domain/Realm
Set the domain name or IP address of the SIP Registrar server.
Proxy
Set domain name or IP address of SIP proxy server. By the
time you can type
:port
number
after the domain name to
specify that port as the destination of data transmission (e.g.,
nat.draytel.org:5065
)
Act as Outbound Proxy
Check this box to make the proxy acting as outbound proxy.
Display Name
The caller-ID that you want to be displayed on your friend’s
screen.
Account Number/Name
Enter your account name of SIP Address, e.g. every text
before @..
Authentication ID
Check the box to invoke this function and enter the name or
number used for SIP Authorization with SIP Registrar. If this
setting value is the same as Account Name, it is not necessary
for you to check the box and set any value in this field.
Password
The password provided to you when you registered with a SIP
service.
Expiry Time
The time duration that your SIP Registrar server keeps your
registration record. Before the time expires, the router will
send another register request to SIP Registrar again.
NAT Traversal Support
If the router (e.g.
,
broadband router) you use connects to
internet by other device, you have to set this function for your
necessity.
None –
Disable this function.
Stun
– Choose this option if there is Stun server provided for
your router.
Manual
– Choose this option if you want to specify an
external IP address as the NAT transversal support.
Nortel
– If the soft-switch that you use supports Nortel
solution, you can choose this option.
Ring Port
Set Phone1, Phone2, ISDN1-S0 or ISDN-TE as the default
ring port for this SIP account. If you choose Phone1, Phone2
or ISDN1-S0, the ISDN2-TE selection will be dimmed, vice
versa. There are ten internal lines with numbers (30 – 39)
offered for
ISDN-S0
.
You can specify one of them or choose

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top