DrayTek VigorPro 5300 Router Manual PDF (Setup & Configuration Guide)

Page 161 / 304 Scroll up to view Page 156 - 160

VigorPro5300 Series User’s Guide

153

Enable

Click this to enable this entry.

Phone Number

The speed-dial number of this index. This can be any number

you choose, using digits

0-9

and

*

.

Display Name

The Caller-ID that you want to be displayed on your friend’s

screen. This let your friend can easily know who’s calling

without memorizing lots of SIP URL Address.

SIP URL

Enter your friend’s SIP Address

This page will differ for different models. Below is a sample page obtained from

VigorPro5300 VSn. The selection of

Loop through

and

Backup Phone Number

is only

available for 2930VSn model.

Enable

Click this to enable this entry.

Phone Number

The speed-dial number of this index. This can be any number

you choose, using digits

0-9

and

*

.

Display Name

The Caller-ID that you want to be displayed on your friend’s

screen. This let your friend can easily know who’s calling

without memorizing lots of SIP URL Address.

SIP URL

Enter your friend’s SIP Address

Loop through

For the model of VigorPro5300 VSn, the selection should be

as the following:

Backup Phone Number

When the VoIP phone is obstructs or the Internet breaks down

for some reasons, the backup phone will be dialed out to

Page 162 / 304

VigorPro5300 Series User’s Guide

154

replace the VoIP phone number. At this time, the phone call

will be changed from VoIP phone into PSTN call according to

the loop through direction chosen. Note that, during the phone

switch, the blare of phone will appear for a short time. And

when the VoIP phone is switched into the PSTN phone, the

telecom co. might charge you for the connection fee. Please

type in backup phone number (PSTN number) for this VoIP

phone setting.

Digit Map

For the convenience of user, this page allows users to edit prefix number for the SIP account

with adding number, stripping number or replacing number. It is used to help user having a

quick and easy way to dial out through VoIP interface.

Enable

Check this box to invoke this setting.

Prefix Number

The phone number set here is used to add, strip, or replace the

OP number.

Mode

None

- No action.

Add

- When you choose this mode, the OP number will be

added with the prefix number for calling out through the

specific VoIP interface.

Page 163 / 304

VigorPro5300 Series User’s Guide

155

Strip

- When you choose this mode, the OP number will be

deleted by the prefix number for calling out through the

specific VoIP interface. Take the above picture (Prefix Table

Setup web page) as an example, the OP number of

886

will be

deleted completely for the prefix number is set with

886

.

Replace

- When you choose this mode, the OP number will be

replaced by the prefix number for calling out through the

specific VoIP interface. Take the above picture (Prefix Table

Setup web page) as an example, the prefix number of 03 will

be replaced by 8863. For example: dial number of

“031111111” will be changed to “88631111111” and sent to

SIP server.

OP Number

The front number you type here is the first part of the account

number that you want to execute special function (according

to the chosen mode) by using the prefix number.

Min Len

Set the minimal length of the dial number for applying the

prefix number settings. Take the above picture (Prefix Table

Setup web page) as an example, if the dial number is between

7 and 9, that number can apply the prefix number settings

here.

Max Len

Set the maximum length of the dial number for applying the

prefix number settings.

Interface

Choose the one that you want to enable the prefix number

settings from the saved SIP accounts. Please set up one SIP

account first to make this interface available.

Call Barring

Call barring is used to block phone calls that are not welcomed.

Page 164 / 304

VigorPro5300 Series User’s Guide

156

Click any index number to display the dial plan setup page.

Enable

Click this to enable this entry.

Call Direction

Determine the direction for the phone call, IN – incoming call,

OUT-outgoing call, IN & OUT – both incoming and outgoing

calls.

Barring Type

Determine the type of the VoIP phone call, URI/URL or

number.

Specific URI/URL or Specific Number -

This field will be

changed based on the type you selected for barring Type.

Page 165 / 304

VigorPro5300 Series User’s Guide

157

Interface

“All” means all the phone calls (including ISDN & PSTN)

will be blocked with such mechanism.

”ISDN” means only ISDN phone call will be blocked with

such mechanism.

Index (1-15) in Schedule

Enter the index of schedule profiles to control the call barring

according to the preconfigured schedules. Refer to section

3.9.2 Schedule

for detailed configuration.

Additionally, you can set advanced settings for call barring such as

Block Anonymous

,

Block Unknown Domain

or

Block IP Address

. Simply click the relational links to open the

web page.

For

Block Anonymous –

this function can block the incoming calls without caller ID on the

interface (Phone 1 or Phone 2 or both) specified in the following window. Such controlling

also can be done based on preconfigured schedules.

For

Block Unknown Domain –

this function can block incoming calls from unrecognized

domain that is not specified in SIP accounts. Such controlling also can be done based on

preconfigured schedules.

For

Block IP Address –

this function can block incoming calls coming from IP address.

Such controlling also can be done based on preconfigured schedules.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share