Page 26 / 251
Scroll up to view Page 21 - 25
Vigor2920 Series User’s Guide
16
2.4 Quick Start Wizard
Notice:
Quick Start Wizard for user mode operation is the same as for admin
mode operation.
If your router can be under an environment with high speed NAT, the configuration provide
here can help you to deploy and use the router quickly. The first screen of
Quick Start
Wizard
is entering login password. After typing the password, please click
Next
.
On the next page as shown below, please select the WAN interface that you use. Choose
Auto
negotiation
as the physical type for your router. Then click
Next
for next step.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 27 / 251
Vigor2920 Series User’s Guide
17
On the next page as shown below, please select the appropriate Internet access type according
to the information from your ISP. For example, you should select PPPoE mode if the ISP
provides you PPPoE interface. Then click
Next
for next step.
2.4.2 PPPoE
PPPoE stands for
Point-to-Point Protocol over Ethernet
. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 28 / 251
Vigor2920 Series User’s Guide
18
If your ISP provides you the
PPPoE
connection, please select
PPPoE
for this router. The
following page will be shown:
User Name
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
Confirm Password
Retype the password.
Click
Next
for viewing summary of such connection.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 29 / 251
Vigor2920 Series User’s Guide
19
2.4.3 PPTP/L2TP
Click
PPTP/L2TP
as the protocol. Type in all the information that your ISP provides for this
protocol.
Click
Next
for viewing summary of such connection.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 30 / 251
Vigor2920 Series User’s Guide
20
2.4.4 Static IP
Click
Static IP
as the protocol. Type in all the information that your ISP provides for this
protocol.
After finishing the settings in this page, click
Next
to see the following page.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
19216811.live