Page 121 / 251
Scroll up to view Page 116 - 120
Vigor2920 Series User’s Guide
111
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose a proper interface (WAN, LAN or Any).
For example, the
Direction
setting in
Edit Filter Rule
will ask
you specify IP or IP range for WAN or LAN or any IP address.
If you choose LAN as the
Interface
here, and choose LAN as
the direction setting in
Edit Filter Rule
, then all the IP
addresses specified with LAN interface will be opened for you
to choose in
Edit Filter Rule
page.
Address Type
Determine the address type for the IP address.
Select
Single Address
if this object contains one IP address
only.
Select
Range Address
if this object contains several IPs within
a range.
Select
Subnet Address
if this object contains one subnet for IP
address.
Select
Any Address
if this object contains any IP address.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed above
will be applied later while it is chosen.
Below is an example of IP objects settings.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 122 / 251
Vigor2920 Series User’s Guide
112
4.5.2 IP Group
This page allows you to bind several IP objects into one IP group.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 123 / 251
Vigor2920 Series User’s Guide
113
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose WAN, LAN or Any to display all the available IP
objects with the specified interface.
Available IP Objects
All the available IP objects with the specified interface chosen
above will be shown in this box.
Selected IP Objects
Click
>>
button to add the selected IP objects in this box.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 124 / 251
Vigor2920 Series User’s Guide
114
4.5.3 Service Type Object
You can set up to 96 sets of Service Type Objects with different conditions.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Name
Type a name for this profile.
Protocol
Specify the protocol(s) which this profile will apply to.
Source/Destination Port
Source Port
and the
Destination Port
column are available for
TCP/UDP protocol. It can be ignored for other protocols. The
filter rule will filter out any port number.
(=)
– when the first and last value are the same, it indicates one
port; when the first and last values are different, it indicates a
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 125 / 251
Vigor2920 Series User’s Guide
115
range for the port and available for this profile.
(!=)
– when the first and last value are the same,
it indicates all
the ports except the port defined here; when the first and
last values are different, it indicates that all the ports except the
range defined here are available for this service type.
(>)
–
the port number greater than this value is available.
(<)
–
the port number less than this value is available for this
profile.
Below is an example of service type objects settings.
4.5.4 Service Type Group
This page allows you to bind several service types into one group.
Set to Factory Default
Clear all profiles.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
19216811.live