Page 21 / 173
Scroll up to view Page 16 - 20
Vigor2900 Series User’s Guide
15
PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection
for accessing the Internet. Your service provider will provide you information about user name,
password, and authentication mode.
If your ISP provides you the
PPPoE
connection, please select
PPPoE
for this router. The
following page will be shown:
User Name
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
Retype Password
Retype the password.
Always On
Check this box to allow the router connecting to Internet
forever.
Idle Timeout
Type in the value (unit is second) as the idle timeout of the
connection. When the time is expired, the internet connection
will be dropped immediately.
Click
Next
for viewing summary of such connection.
Click
Finish
to save current settings and restart the router.
Page 22 / 173
Vigor2900 Series User’s Guide
16
2.2.3 PPTP
For PPTP connection, please click
PPTP
as the protocol.
Click
Next
to see the following page.
User Name
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
Retype Password
Retype the password.
Obtain an IP address
automatically
Click this selection to get the IP address from the router
automatically.
Specify an IP address
Click this selection to specify an IP address and subnet mask
manually.
IP Address
Type a specific IP address for PPTP connection mode that
obtained from ISP.
Subnet Mask
Type the subnet mask.
Page 23 / 173
Vigor2900 Series User’s Guide
17
PPTP Server IP
Specify the IP address of the PPTP Server.
After finishing the settings in this page, click
Next
to see the following page.
Click
Finish
to save current settings and restart the router.
Page 24 / 173
Vigor2900 Series User’s Guide
18
2.2.4 L2TP
Note: This setting is available only for
Vigor 2900, Vigor 2900G, Vigor
2900Gi
and
Vigor 2900i
.
Click
L2TP
as the protocol.
Click
Next
to see the following page.
User Name
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
Retype Password
Retype the password.
Obtain an IP address
automatically
Click this selection to get the IP address from the router
automatically.
Specify an IP address
Click this selection to specify an IP address and subnet mask
manually.
IP Address
Type a specific IP address for PPTP connection mode that
obtained from ISP.
Page 25 / 173
Vigor2900 Series User’s Guide
19
Subnet Mask
Type the subnet mask.
PPTP Server IP
Specify the IP address of the PPTP Server.
After finishing the settings in this page, click
Next
to see the following page.
Click
Finish
to save current settings and restart the router.
2.2.5 Static IP
Click
Static IP
as the protocol.
19216811.live