1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2900V
    5. /
  5. 3
Page 11 / 173 Scroll up to view Page 6 - 10
Vigor2900 Series User’s Guide
5
1.1.4 Front and Rear View for Vigor2900i
ACT
ISDN
QoS
Attack VPN Printer
WAN
P1
P2
P3
P4
LAN
LED
Status
Explanation
ACT (Activity)
Blinking
The router is powered on and running properly.
On
The ISDN network is correctly setup.
ISDN
Blinking
A successful remote connection on the ISDN BRI
B1/B2 channel.
QoS
On
The QoS function is active.
On
DoS Defense function is active.
Attack
Blinking
An attack is detected.
VPN
On
The VPN tunnel is launched.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps WAN link is ready.
Green
A normal 100Mbps WAN link is ready.
WAN
Blinking
Ethernet packets are transmitting.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (1, 2, 3, 4)
Blinking
Ethernet packets are transmitting.
Factory
Reset
WAN
P1
P2
P3
P4
PWR
Printer
ISDN
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter.
0/1
Power Switch.
P1 – P4
Connecter for local networked devices.
WAN
Connecter for remote networked devices.
ISDN
Connect for NT1 (or NT1+) box provided by ISDN service provider.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Page 12 / 173
Vigor2900 Series User’s Guide
6
1.1.5 Front and Rear View for Vigor2900V
LED
Status
Explanation
ACT (Activity)
Blinking
The router is powered on and running properly.
QoS
On
The QoS function is active.
On
The phone is off hook (the handset of phone is
hanging).
Phone
(FXS1, FXS2)
Blinking
A phone call is incoming.
VPN
On
The VPN tunnel is launched.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps WAN link is ready.
Green
A normal 100Mbps WAN link is ready.
WAN
Blinking
Ethernet packets are transmitting.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (1, 2, 3, 4)
Blinking
Ethernet packets are transmitting.
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter.
0/1
Power Switch.
FXS 2 - 1
Connecter of analog phone for VoIP communication.
P1 – P4
Connecter for local networked devices.
WAN
Connecter for remote networked devices.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Page 13 / 173
Vigor2900 Series User’s Guide
7
1.1.6 Front and Rear View for Vigor2900VG
LED
Status
Explanation
ACT (Activity)
Blinking
The router is powered on and running properly.
QoS
On
The QoS function is active.
On
The phone is off hook (the handset of phone is
hanging).
Phone
(FXS1, FXS2)
Blinking
A phone call is incoming.
On
The wireless LAN function is enabled.
WLAN
Blinking
Ethernet packets are transmitting over wireless LAN.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps WAN link is ready.
Green
A normal 100Mbps WAN link is ready.
WAN
Blinking
Ethernet packets are transmitting.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (1, 2, 3, 4)
Blinking
Ethernet packets are transmitting.
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter.
0/1
Power Switch.
FXS 2 - 1
Connecter of analog phone for VoIP communication.
P1 – P4
Connecter for local networked devices.
WAN
Connecter for remote networked devices.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Page 14 / 173
Vigor2900 Series User’s Guide
8
1.1.7 Front and Rear View for Vigor2900VGi
LED
Status
Explanation
ACT (Activity)
Blinking
The router is powered on and running properly.
On
The ISDN network is correctly setup.
ISDN
Blinking
A successful remote connection on the ISDN BRI
B1/B2 channel.
On
The phone is off hook (the handset of phone is
hanging).
Phone
(FXS1, FXS2)
Blinking
A phone call is incoming.
On
The wireless LAN function is enabled.
WLAN
Blinking
Ethernet packets are transmitting over wireless LAN.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps WAN link is ready.
Green
A normal 100Mbps WAN link is ready.
WAN
Blinking
Ethernet packets are transmitting.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (1, 2, 3, 4)
Blinking
Ethernet packets are transmitting.
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter.
0/1
Power Switch.
FXS 2 - 1
Connecter of analog phone for VoIP communication.
P1 – P4
Connecter for local networked devices.
WAN
Connecter for remote networked devices.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Page 15 / 173
Vigor2900 Series User’s Guide
9
1.1.8 Front and Rear View for Vigor2900Vi
LED
Status
Explanation
ACT (Activity)
Blinking
The router is powered on and running properly.
On
The ISDN network is correctly setup.
ISDN
Blinking
A successful remote connection on the ISDN BRI
B1/B2 channel.
On
The phone is off hook (the handset of phone is
hanging).
Phone
(FXS1, FXS2)
Blinking
A phone call is incoming.
VPN
On
The VPN tunnel is launched.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps WAN link is ready.
Green
A normal 100Mbps WAN link is ready.
WAN
Blinking
Ethernet packets are transmitting.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (1, 2, 3, 4)
Blinking
Ethernet packets are transmitting.
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter.
0/1
Power Switch.
FXS 2 - 1
Connecter of analog phone for VoIP communication.
P1 – P4
Connecter for local networked devices.
WAN
Connecter for remote networked devices.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.

Rate

3.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top