1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 88
Page 436 / 794 Scroll up to view Page 431 - 435
Vigor2860 Series User’s Guide
422
3.19.6 Configuration Backup
Such function can be used to apply the router settings configured by Vigor2820/ Vigor2830/
Vigor2850 to Vigor2860.
Backup the Configuration
Follow the steps below to backup your configuration.
1.
Go to
System Maintenance
>>
Configuration Backup
. The following page will be
popped-up, as shown below.
Available settings are explained as follows:
Item
Description
Restore
Choose File
– Click it to specify a file to be restored.
Restore configuration except the login password -
If the
password settings shall not be restored and applied to
Vigor2860, simply check this box to get rid of password
settings.
Click
Restore
to restore the configuration. If the file is
encrypted, the system will ask you to type the password to
decrypt the configuration file.
Backup
Protect with password
- For the sake of security, the
configuration file for the router can be encrypted.
Password
– Type several characters as the password
for encrypting the configuration file.
Confirm Password
– Type the password again for
Page 437 / 794
Vigor2860 Series User’s Guide
423
confirmation.
Click
Backup
to perform the configuration backup of this
router.
Supported Model
List
Web configuration file from
other
Vigor router can be
applied to Vigor2860 series. At present, the configuration
file of Vigor2820/Vigor2830/Vigor2850 is accepted for
Vigor 2860.
This field displays model name(s) and firmware which web
configuration file saved can be used by such router.
2.
Click
Backup
button to get into the following dialog. Click
Save
button to open another
dialog for saving configuration as a file.
3.
In
Save As
dialog, the default filename is
config.cfg
. You could give it another name by
yourself.
4.
Click
Save
button, the configuration will download automatically to your computer as a
file named
config.cfg
.
The above example is using
Windows
platform for demonstrating examples. The
Mac
or
Linux
platform will appear different windows, but the backup function is still available.
Note:
Backup for Certification must be done independently. The Configuration Backup
does not include information of Certificate.
Page 438 / 794
Vigor2860 Series User’s Guide
424
Restore Configuration
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Click
Choose File
button to choose the correct configuration file for uploading to the
router.
3.
Click
Restore
button and wait for few seconds, the following picture will tell you that
the restoration procedure is successful.
Page 439 / 794
Vigor2860 Series User’s Guide
425
3.19.7 Syslog/Mail Alert
SysLog function is provided for users to monitor router.
Available settings are explained as follows:
Item
Description
SysLog Access Setup
Enable
- Check
Enable
to activate function of syslog.
Syslog Save to
– Check
Syslog Server
to save the log to
Syslog server.
Check
USB Disk
to save the log to the attached USB
storage disk.
Router Name
Display the name for such router configured in
System
Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management
to set the router
name.
Server IP Address -
The IP address of the Syslog server.
Destination Port -
Assign a port for the Syslog protocol.
Mail Syslog –
Check the box to recode the mail event on
Syslog.
Enable syslog message -
Check the box listed on this web
page to send the corresponding message of firewall, VPN,
User Access, Call, WAN, Router/DSL information to
Syslog.
Page 440 / 794
Vigor2860 Series User’s Guide
426
AlertLog Setup
Check
Enable
to activate function of alert log.
AlertLog Port
- Type the port number for alert log. The
default setting is 514.
Mail Alert Setup
Check
Enable
to activate function of mail alert.
Send a test e-mail -
Make a simple test for the e-mail
address specified in this page. Please assign the mail
address first and click this button to execute a test for verify
the mail address is available or not.
SMTP Server/SMTP Port -
The IP address/Port number
of the SMTP server.
Mail To -
Assign a mail address for sending mails out.
Return-Path -
Assign a path for receiving the mail from
outside.
Use SSL -
Check this box to use port 465 for SMTP server
for some e-mail server uses https as the transmission
method.
Authentication -
Check this box to activate this function
while using e-mail application.
User Name -
Type the user name for authentication.
Password -
Type the password for authentication.
Enable E-mail Alert -
Check the box to send alert message
to the e-mail box while the router detecting the item(s) you
specify here.
Click
OK
to save these settings.
For viewing the Syslog, please do the following:
1.
Just set your monitor PC’s IP address in the field of Server IP Address
2.
Install the Router Tools in the
Utility
within provided CD. After installation, click on the
Router Tools>>Syslog
from program menu.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top