1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 86
Page 426 / 794 Scroll up to view Page 421 - 425
Vigor2860 Series User’s Guide
412
3.19 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
System Status, TR-069, Administrator Password, User Password, Login Page Greeting,
Configuration Backup, Syslog /Mail Alert, Time and Date, Management, Reboot System,
Firmware Upgrade and Activation.
Below shows the menu items for System Maintenance.
3.19.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Page 427 / 794
Vigor2860 Series User’s Guide
413
Available settings are explained as follows:
Item
Description
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
LAN
MAC Address
-
Display the MAC address of the LAN Interface.
IP Address
-
Display the IP address of the LAN interface.
Subnet Mask
-
Display the subnet mask address of the LAN interface.
DHCP Server
-
Display the current status of DHCP server of the LAN
interface
DNS
-
Display the assigned IP address of the primary DNS.
WAN
Link Status
-
Display current connection status.
MAC Address
-
Display the MAC address of the WAN Interface.
Connection
-
Display the connection type.
IP Address
-
Display the IP address of the WAN interface.
Default Gateway
-
Display the assigned IP address of the default gateway.
IPv6
Address -
Display the IPv6 address for LAN.
Scope -
Display
the scope of IPv6 address. For example,
IPv6
Link Local
could only be used for direct IPv6 link. It
can't be used for IPv6 internet.
Internet Access Mode –
Display
the connection mode
chosen for accessing into Internet.
Page 428 / 794
Vigor2860 Series User’s Guide
414
3.19.2 TR-069
This device supports TR-069 standard. It is very convenient for an administrator to manage a
TR-069 device through an Auto Configuration Server
,
e.g., VigorACS.
Available settings are explained as follows:
Item
Description
ACS Server On
Choose the interface for the router connecting to ACS
server.
ACS Server
URL/Username/Password –
Such data must be typed
according to the ACS (Auto Configuration Server) you
want to link. Please refer to Auto Configuration Server
user’s manual for detailed information.
Test With Inform
– Click it to send a message based on
the event code selection to test if such CPE is able to
communicate with VigorACS SI server.
Event Cod
e – Use the drop down menu to specify an event
to perform the test.
Last Inform Response Time
– Display the time that
VigorACS server made a response while receiving Inform
message from CPE last time.
CPE Client
Such information is useful for Auto Configuration Server.
Page 429 / 794
Vigor2860 Series User’s Guide
415
Enable/Disable
– Allow/Deny the CPE Client to connect
with Auto Configuration Server.
Port
– Sometimes, port conflict might be occurred. To
solve such problem, you might change port number for
CPE.
Username and Password
– Type the username and
password that VigorACS can use to access into such CPE.
Periodic Inform Settings
The default setting is
Enable
. Please set interval time or
schedule time for the router to send notification to CPE. Or
click
Disable
to close the mechanism of notification.
STUN Settings
The default is
Disable
. If you click
Enable
, please type the
relational settings listed below:
Server IP –
Type the IP address of the STUN server.
Server Port –
Type the port number of the STUN server.
Minimum Keep Alive Period –
If STUN is enabled, the
CPE must send binding request to the server for the purpose
of maintaining the binding in the Gateway. Please type a
number as the minimum period. The default setting is “60
seconds”.
Maximum Keep Alive Period –
If STUN is enabled, the
CPE must send binding request to the server for the purpose
of maintaining the binding in the Gateway. Please type a
number as the maximum period. A value of “-1” indicates
that no maximum period is specified.
After finishing all the settings here, please click
OK
to save the configuration.
Page 430 / 794
Vigor2860 Series User’s Guide
416
3.19.3 Administrator Password
This page allows you to set new password.
Available settings are explained as follows:
Item
Description
Administrator Password
Old Password
- Type in the old password. The factory
default setting for password is
“admin”
.
New Password
-Type in new password in this field. The
length of the password is limited to 23 characters.
Confirm Password
-Type in the new password again.
Administrator Local User
The administrator can login web user interface of Vigor
router to modify all of the settings to fit the requirements.
This feature allows other user in LAN who can access into
the web user interface with the same privilege of the
administrator.
Local User
– Check the box to enable the local user
configuration.
Local User List
– It displays the username of the local
user.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top