19216811.liveVigor2860 Series User’s Guide
377
can be grouped under SSID 1 and SSID 2 at the same time
if you check SSID 1 and SSID 2.
MAC Address Filter
Display all MAC addresses that are edited before.
Client’s MAC Address
Manually enter the MAC address of wireless client.
Apply SSID
After entering the client’s MAC address, check the box of
the SSIDs desired to insert this MAC address into their
access control list.
Attribute
s: Isolate the station from LAN -
select to isolate the
wireless connection of the wireless client of the MAC
address from LAN.
Add
Add a new MAC address into the list.
Delete
Delete the selected MAC address in the list.
Edit
Edit the selected MAC address in the list.
Cancel
Give up the access control set up.
OK
Click it to save the access control list.
Clear All
Clean all entries in the MAC address list.
After finishing all the settings here, please click
OK
to save the configuration.
3.16.5 WPS
WPS (Wi-Fi Protected Setup)
provides easy procedure to make network connection between
wireless station and wireless access point (vigor router) with the encryption of WPA and
WPA2.
Note:
Such function is available for the wireless station with WPS supported.
It is the simplest way to build connection between wireless network clients and vigor router.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press a button on wireless client, and
WPS will connect for client and router automatically.
There are two methods to do network connection through WPS between AP and Stations:
pressing the
Start PBC
button or using
PIN Code
.