Vigor2860 Series User’s Guide
198
Available settings are explained as follows:
Item
Description
Enable this account
Check this box to enable such user profile.
User Name
Type a name for such user profile (e.g.,
LAN_User_Group_1, WLAN_User_Group_A,
WLAN_User_Group_B,
etc). When a user tries to access
Internet through this router, an authentication step must be
performed first. The user has to type the User Name
specified here to pass the authentication. When the user
passes the authentication, he/she can access Internet via this
router. However the accessing operation will be restricted
with the conditions configured in this user profile.
The maximum length of the name you can set is 24
characters.
Password
Type a password for such profile (e.g.,
lug123,
wug123,wug456,
etc). When a user tries to access Internet
through this router, an authentication step must be
performed first. The user has to type the password specified
here to pass the authentication. When the user passes the
authentication, he/she can access Internet via this router
with the limitation configured in this user profile.
The maximum length of the password you can set is 24
characters.
Confirm Password
Type the password again for confirmation.
Idle Timeout
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user.
By
default, the Idle Timeout is set to 10 minutes.
Max User Login
Such profile can be used by many users. You can set the
limitation for the number of users accessing Internet with
the conditions of such profile. The default setting is 0 which
means no limitation in the number of users.
Policy
It is available only when
User-Based
mode selected in
User Management>>General Setup
.
Default
– If you choose such item, the filter rules
pre-configured in
Firewall
can be adopted for such user
profile.
Create New Policy
– If you choose such item, the
following page will be popped up for you to define another
filter rule as a new policy.
19216811.live