1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860n-plus
    5. /
  5. 32
Page 156 / 794 Scroll up to view Page 151 - 155
Vigor2860 Series User’s Guide
142
3.2.4 VLAN
With the 6-port Gigabit switch on the LAN side, Vigor router provides extremely high speed
connectivity for the highest speed local data transfer of any server or local PCs. On the
Wireless-equipped models (Vigor2860n/Vigor2860n-plus/Vigor2860Vn-plus/
Vigor2860ac/Vigor2860Vac), each of the wireless SSIDs can also be grouped within one of
the VLANs.
Tagged VLAN
The tagged VLANs (802.1q) can mark data with a VLAN identifier. This identifier can be
carried through an onward Ethernet switch to specific ports. The specific VLAN clients can
also pick up this identifier as it is just passed to the LAN. You can set the priorities for
LAN-side QoS. You can assign each of VLANs to each of the different IP subnets that the
router may also be operating, to provide even more isolation. The said functionality is
tag-based multi-subnet
.
Port-Based VLAN
Relative to tag-based VLAN which groups clients with an identifier, port-based VLAN uses
physical ports (P1 ~ P6) to separate the clients into different VLAN group.
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. The multi-subnet can let a small businesses have much better
isolation for multi-occupancy applications. Go to
LAN
page and select
VLAN
. The following
page will appear. Click
Enable
to invoke VLAN function.
Below is an example page in Vigor2860n:
Page 157 / 794
Vigor2860 Series User’s Guide
143
For Vigor2860n-plus and Vigor2860ac series, the web page will be shown as follows:
Note:
Settings in this page only applied to LAN port but not WAN port.
Available settings are explained as follows:
Item
Description
Enable
Click it to enable VLAN configuration.
LAN
P1 – P6
– Check the LAN port(s) to group them under the
selected VLAN.
Wireless LAN (2.4GHz)
SSID1 – SSID4 –
Check the SSID boxes to group them
under the selected VLAN.
Wireless LAN (5GHz)
SSID1 – SSID4 –
Check the SSID boxes to group them
under the selected VLAN.
Subnet
Choose one of them to make the selected VLAN mapping
to the specified subnet only. For example, LAN1 is
specified for VLAN0. It means that PCs grouped under
VLAN0 can get the IP address(es) that specified by the
subnet.
Page 158 / 794
Vigor2860 Series User’s Guide
144
VLAN Tag
Enable
– Check the box to enable the function of VLAN
with tag.
The router will add specific VLAN number to all packets
on the LAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by LAN.
VID
– Type the value as the VLAN ID number. The range
is form 0 to 4095.
Priority
– Type the packet priority number for such VLAN.
The range is from 0 to 7.
Permit untagged device in
P1 to access router
It can help users to communicate with the router still even
though configuring wrong VLAN tag setting. It is
recommended to enable the management port (LAN 1) to
ensure the data transmission is unimpeded.
Note:
Leave one VLAN untagged at least to prevent from not connecting to Vigor router
due to unexpected error.
Vigor2860 series features a hugely flexible VLAN system. In its simplest form, each of the
Gigabit LAN ports can be isolated from each other, for example to feed different companies or
departments but keeping their local traffic completely separated.
Configuring port-based VLAN for wireless and non-wireless clients
1.
All the wire network clients are categorized to group VLAN0 in subnet 192.168.1.0/24
(LAN1).
2.
All the wireless network clients are categorized to group VLAN1 in subnet
192.168.2.0/24 (LAN2).
3.
Open
LAN>>VLAN Configuration
. Check the boxes according to the statement in step
1 and Step 2.
4.
Click
OK
.
Page 159 / 794
Vigor2860 Series User’s Guide
145
5.
Open
LAN>>General Setup
. If you want to let the clients in both groups communicate
with each other, simply activate
Inter-LAN Routing
by checking the box between
LAN1
and
LAN2.
Vigor router supports up to six private IP subnets on LAN. Each can be independent
(isolated) or common (able to communicate with each other). This is ideal for
departmental or multi-occupancy applications.
Note:
As for the VLAN applications, refer to “Appendix I: VLAN Application on
Vigor Router” for more detailed information.
Page 160 / 794
Vigor2860 Series User’s Guide
146
3.2.5 Bind IP to MAC
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click
LAN
and click
Bind IP to MAC
to open the setup page.
Available settings are explained as follows:
Item
Description
Enable
Click this radio button to invoke this function.
However,
IP/MAC which is not listed in IP Bind List also can connect
to Internet.
Disable
Click this radio button to disable this function. All the
settings on this page will be invalid.
Strict Bind
Click this radio button to block the connection of the
IP/MAC which is not listed in IP Bind List.
ARP Table
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can
be selected and added to IP Bind List by clicking
Add
below
.
Select All
Click this link to select all the items in the ARP table.
Sort
Reorder the table based on the IP address.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top