1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2800G
    5. /
  5. 40
Page 196 / 202 Scroll up to view Page 191 - 195
Vigor2800 Series User’s Guide
190
For Windows
±
The example is based on Windows XP. As to the examples for other
operation systems, please refer to the similar steps or find support notes in
www.draytek.com
.
1.
Go to Control Panel and then double-click on Network Connections.
2.
Right-click on Local Area Connection and click on Properties.
3.
Select Internet Protocol (TCP/IP) and then click Properties.
Page 197 / 202
Vigor2800 Series User’s Guide
191
4.
Select Obtain an IP address automatically and Obtain DNS server address
automatically.
For MacOs
1.
Double click on the current used MacOs on the desktop.
2.
Open the
Application
folder and get into
Network
.
3.
On the
Network
screen, select
Using DHCP
from the drop down list of Configure
IPv4.
Page 198 / 202
Vigor2800 Series User’s Guide
192
5.3 Pinging the Router from Your Computer
The default gateway IP address of the router is 192.168.1.1. For some reason, you might
need to use “ping” command to check the link status of the router.
The most important
thing is that the computer will receive a reply from 192.168.1.1.
If not, please check the
IP address of your computer. We suggest you setting the network connection as
get IP
automatically
. (Please refer to the section 4.2)
Please follow the steps below to ping the router correctly.
For Windows
1.
Open the
Command
Prompt window (from
Start menu> Run
).
2.
Type
command
(for Windows 95/98/ME) or
cmd
(for Windows NT/ 2000/XP). The
DOS command dialog will appear.
3.
Type ping 192.168.1.1 and press [Enter]. It the link is OK, the line of “Reply from
192.168.1.1:bytes=32 time<1ms TTL=25” will appear.
4.
If the line does not appear, please check the IP address setting of your computer.
For MacOs (Terminal)
1.
Double click on the current used MacOs on the desktop.
2.
Open the
Application
folder and get into
Utilities
.
3.
Double click
Terminal
. The Terminal window will appear.
4.
Type
and press [Enter]. It the link is OK, the line of
“64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms
” will appear.
Page 199 / 202
Vigor2800 Series User’s Guide
193
5.4 Checking If the ISP Settings are OK or Not
Click
Internet Access
group and then check whether the ISP settings are set correctly.
For PPPoE/PPPoA Users
1.
Check if the
Enable
option is selected.
2.
Check if
Username
and
Password
are entered with correct values that you
got from
your
ISP
.
Page 200 / 202
Vigor2800 Series User’s Guide
194
For MPoA Users
1.
Check if the
Enable
option for Broadband Access is selected.
2.
Check if all parameters of
DSL Modem Settings
are entered with correct value that
provided by your ISP. Especially, check if the encapsulation is selected properly or not
(it should be the same with the setting on
Quick Start Wizard
).
3.
Check if
IP Address, Subnet Mask
and
Gateway
are set correctly (must identify with
the values from your ISP) if you choose
Specify an IP address
.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top