DrayTek Vigor-2710n Router Manual PDF (Setup & Configuration Guide)

Page 241 / 335 Scroll up to view Page 236 - 240

Vigor2710 Series User’s Guide

229

Detailed Settings for Phone Port

Click the

number link

for Phone/DECT port, you can access into the following page for

configuring Phone settings.

Phone Port Web Page for Vigor2710 Vn -------

DECT Port Web Page for Vigor2710 VDn -------

Hotline

Check the box to enable it. Type in the SIP URL in the field

for dialing automatically when you pick up the phone set.

Session Timer

Check the box to enable the function. In the limited time that

Page 242 / 335

Vigor2710 Series User’s Guide

230

you set in this field, if there is no response, the connecting call

will be closed automatically.

T.38 Fax Function

Check the box to enable the function.

Call Forwarding

There are four options for you to choose.

Disable

is to close

call forwarding function.

Always

means all the incoming calls

will be forwarded into SIP URL without any reason.

Busy

means the incoming calls will be forwarded into SIP URL only

when the local system is busy.

No Answer

means if the

incoming calls do not receive any response, they will be

forwarded to the SIP URL by the time out.

Busy or No

Answer

means if the incoming calls will be forwarded into

SIP URL when the local system is busy or do not receive any

response.

SIP URL

– Type in the SIP URL (e.g., [email protected] or

[email protected]) as the site for call forwarded.

Time Out

– Set the time out for the call forwarding. The

default setting is 30 sec.

DND (Do Not Disturb)

mode

Set a period of peace time without disturbing by VoIP phone

call. During the period, the one who dial in will listen busy

tone, yet the local user will not listen any ring tone.

Index (1-15) in Schedule -

Enter the index of schedule

profiles to control the call barring according to the

preconfigured schedules. Refer to section

Application>>Schedule

for detailed configuration.

Index (1-60) in Phone Book -

Enter the index of phone book

profiles. Refer to section

VoIP>>DialPlan>>Phone Book

for

detailed configuration.

CLIR (hide caller ID)

Check this box to hide the caller ID on the display panel of the

phone set.

Call Waiting

Check this box to invoke this function. A notice sound will

appear to tell the user new phone call is waiting for your

response. Click hook flash to pick up the waiting phone call.

Call Transfer

Check this box to invoke this function. Click hook flash to

initiate another phone call. When the phone call connection

succeeds, hang up the phone. The other two sides can

communicate, then.

Default SIP Account

You can set SIP accounts (up to six groups) on SIP Account

page. Use the drop down list to choose one of the profile

names for the accounts as the default one for this phone

setting.

Play dial tone only when account registered -

Check this

box to invoke the function.

Page 243 / 335

Vigor2710 Series User’s Guide

231

In addition, you can press the

Advanced

button to configure tone settings, volume gain,

MISC and DTMF mode.

Advanced

setting is provided for fitting the telecommunication

custom for the local area of the router installed. Wrong tone settings might cause

inconvenience for users. To set the sound pattern of the phone set, simply choose a proper

region to let the system find out the preset tone settings and caller ID type automatically. Or

you can adjust tone settings manually if you choose User Defined. TOn1, TOff1, TOn2 and

TOff2 mean the cadence of the tone pattern. TOn1 and TOn2 represent sound-on; TOff1 and

TOff2 represent the sound-off.

Region

Select the proper region which you are located. The common

settings of

Caller ID Type

,

Dial tone

,

Ringing tone

,

Busy

tone

and

Congestion tone

will be shown automatically on the

page. If you cannot find out a suitable one, please choose

User

Defined

and fill out the corresponding values for dial tone,

ringing tone, busy tone, and congestion tone by yourself for

VoIP phone.

Page 244 / 335

Vigor2710 Series User’s Guide

232

Also, you can specify each field for your necessity. It is

recommended for you to use the default settings for VoIP

communication.

Volume Gain

Mic Gain (1-10)/Speaker Gain (1-10)

- Adjust the volume of

microphone and speaker by entering number from 1- 10. The

larger of the number, the louder the volume is.

MISC

Dial Tone Power Leve

l - This setting is used to adjust the

loudness of the dial tone. The smaller the number is, the louder

the dial tone is.

It is recommended for you to use the default

setting.

Ring Frequency

- This setting is used to drive the frequency

of the ring tone. It is recommended for you to use the default

setting. Notice that such setting is not available for DECT

phone port.

DTMF

DTMF Mode –

There are four DTMF modes for you to

choose.

InBand

-

Choose this one then the Vigor will send the DTMF

tone as audio directly when you press the keypad on the

phone.

OutBand

-

Choose this one then the Vigor will capture the

keypad number you pressed and transform it to digital form

then send to the other side; the receiver will generate the tone

according to the digital form it receive. This function is very

useful when the network traffic congestion occurs and it still

can remain the accuracy of DTMF tone.

SIP INFO

-

Choose this one then the Vigor will capture the

DTMF tone and transfer it into SIP form. Then it will be sent

to the remote end with SIP message.

Page 245 / 335

Vigor2710 Series User’s Guide

233

Payload Type (rfc2833)

- Choose a number from 96 to 127,

the default value was 101. This setting is available for the

OutBand (RFC2833) mode.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share