Vigor2710 Series User’s Guide
179
For adding a new rule, click
Add
to open the following page.
ACT
Check this box to invoke these settings.
Local Address
Click the
Edit
button to set the local IP address (on LAN) for
the rule.
Remote Address
Click the
Edit
button to set the remote IP address (on
LAN/WAN) for the rule.
Edit
It allows you to edit source address information.
Address Type –
Determine the address type for the source
address.
For
Single Address
, you have to fill in Start IP address.
For
Range Address
, you have to fill in Start IP address and
End IP address.
For
Subnet Address
, you have to fill in Start IP address and
Subnet Mask.
DiffServ CodePoint
All the packets of data will be divided with different levels and
will be processed according to the level type by the system.
Please assign one of the levels of the data for processing with
QoS control.
Service Type
It determines the service type of the data for processing with
QoS control. It can also be edited. You can choose the
predefined service type from the Service Type drop down list.
Those types are predefined in factory. Simply choose the one
that you want for using by current QoS.
By the way, you can set up to 20 rules for one Class. If you want to edit an existed rule,
please select the radio button of that one and click
Edit
to open the rule edit page for
modification.