Page 31 / 335 Scroll up to view Page 26 - 30
Vigor2710 Series User’s Guide
19
Note:
The home page will change slightly in accordance with the type of the router
you have.
4.
Go to
System
Maintenance
page and choose
Administrator Password/User
Password
.
or
5.
Enter the login password (the default is blank) on the field of
Old Password
. Type the
new password in
New Password
and
Confirm Password
fields. Then click
OK
to
continue.
6.
Now, the password has been changed. Next time, use the new password to access the
Web Configurator for this router.
Page 32 / 335
Vigor2710 Series User’s Guide
20
2.4 Quick Start Wizard
Notice:
Quick Start Wizard for user operation is the same as for administrator’s
operation.
If your router can be under an environment with high speed NAT, the configuration provide
here can help you to deploy and use the router quickly. The first screen of
Quick Start
Wizard
is entering login password. After typing the password, please click
Next
.
2.4.1 Adjusting Protocol/Encapsulation
In the
Quick Start Wizard
, you can configure the router to access the Internet with different
protocol/modes such as
PPPoE
,
PPPoA, Bridged IP,
or
Routed IP
. The router supports the
ADSL WAN interface for Internet access.
Now, you have to select an appropriate WAN connection type for connecting to the Internet
through this router according to the settings that your ISP provided.
VPI
Stands for
Virtual Path Identifier
. It is an 8-bit header
Page 33 / 335
Vigor2710 Series User’s Guide
21
inside each ATM cell that indicates where the cell should be
routed. The ATM, is a method of sending data in small packets
of fixed sizes. It is used for transferring data to client
computers.
VCI
Stands for
Virtual Channel Identifier.
It is a 16-bit field
inside ATM cell’s header that indicates the cell’s next
destination as it travels through the network. A virtual channel
is a logical connection between two end devices on the
network.
Protocol/Encapsulation
Select an IP mode for this WAN interface. There are several
available modes for Internet access such as
PPPoE
,
PPPoA,
Bridged IP
and
Routed IP
.
Fixed IP
Click
Yes
to specify a fixed IP for the router. Otherwise, click
No (Dynamic IP)
to allow the router choosing a dynamic IP.
If you choose
No
, the following IP Address, Subnet Mask and
Default Gateway will not be changed.
IP Address
Assign an IP address for the protocol that you select.
Subnet Mask
Assign a subnet mask value for the protocol of
Routed IP
and
Bridged IP
.
Default Gateway
Assign an IP address to the gateway for the protocol of
Routed IP
and
Bridged IP
.
Primary DNS
Assign an IP address to the primary DNS.
Second DNS
Assign an IP address to the secondary DNS.
2.4.2 PPPoE/PPPoA
PPPoE stands for
Point-to-Point Protocol over Ethernet
. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local users can share one PPPoE
connection for accessing the Internet. Your service provider will provide you information
about user name, password, and authentication mode.
Page 34 / 335
Vigor2710 Series User’s Guide
22
If your ISP provides you the
PPPoE
connection, please select
PPPoE
for this router. The
following page will be shown:
User Name
Assign a specific valid user name provided by the ISP.
Password
Assign a valid password provided by the ISP.
Confirm Password
Retype the password.
Click
Next
for viewing summary of such connection.
Click
Finish.
Then, the system status of this protocol will be shown.
Page 35 / 335
Vigor2710 Series User’s Guide
23
2.4.3 1483 Bridged IP
Click
1483 Bridged IP
as the protocol. Type in all the information that your ISP provides
for this protocol.
Click
Next
for viewing summary of such connection.
Click
Finish.
Then, the system status of this protocol will be shown.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top