Page 311 / 335
Scroll up to view Page 306 - 310
Vigor2710 Series User’s Guide
299
9.
Click
Edit
to open the following window. Check the
ACT
box, first.
10.
Then click
Edit
of
Local Address
to set a worker’s subnet address. Click
Edit
of
Remote Address
to set headquarter’s IP address. Leave other fields and click
OK
.
Page 312 / 335
Vigor2710 Series User’s Guide
300
5.4 LAN – Created by Using NAT
An example of default setting and the corresponding deployment are shown below. The
default Vigor router private IP address/Subnet Mask is
192.168.1.1/255.255.255.0. The
built-in DHCP server is enabled so it assigns every local NATed host an IP address of
You can just set the settings wrapped inside the red rectangles to fit the request of NAT
usage.
To use another DHCP server in the network rather than the built-in one of Vigor Router, you
have to change the settings as show below.
Page 313 / 335
Vigor2710 Series User’s Guide
301
You can just set the settings wrapped inside the red rectangles to fit the request of NAT
usage.
Page 314 / 335
Vigor2710 Series User’s Guide
302
5.5 Calling Scenario for VoIP function
5.5.1 Calling via SIP Sever
Example 1: Both John and David have SIP Addresses from different service providers.
Settings for John
DialPlan index 1
Phone Number: 1111
Display Name: David
SIP Accounts Settings ---
Profile Name: draytel1
Register via: Auto
SIP Port: 5060 (default)
Domain/Realm: draytel.org
Proxy: draytel.org
Act as outbound proxy:
unhecked
Display Name: John
Account Number/Name: 1234
Authentication ID: unchecked
Password: ****
Expiry Time: (use default value)
CODEC/RTP/DTMF ---
(Use default value)
John calls David ---
He picks up the phone and dials 1111#. (DialPlan
Phone Number for David)
Settings for David
DialPlan index 1
Phone Number:2222
Display Name: John
SIP Accounts Settings ---
Profile Name: iptel 1
Register via: Auto
SIP Port: 5060(default)
Domain/Realm: iptel.org
Proxy: iptel.org
Act as outbound proxy:
unchecked
Display Name: David
Account Name: 4321
Authentication ID: unchecked
Password: ****
Expiry Time: (use default value)
Page 315 / 335
Vigor2710 Series User’s Guide
303
CODEC/RTP/DTMF ---
(Use default value)
David calls John
He picks up the phone and dials 2222# (DialPlan
Phone Number for John)
Example 2: Both John and David have SIP Addresses from the same service provider.
Settings for John
DialPlan index 1
Phone Number: 1111
Display Name: David
SIP Accounts Settings ---
Profile Name: draytel 1
Register via: Auto
SIP Port: 5060 (default)
Domain/Realm: draytel.org
Proxy: draytel.org
Act as outbound proxy: unchecked
Display Name: John
Account Number/Name: 1234
Authentication ID: unchecked
Password: ****
Expiry Time: (use default value)
CODEC/RTP/DTMF ---
(Use default value)
John calls David
He picks up the phone and dials 1111#. (DialPlan
Phone Number for David)
Or,
He picks up the phone and dials 4321#. (David’s
Account Name)
19216811.live