Page 166 / 335
Scroll up to view Page 161 - 165
Vigor2710 Series User’s Guide
154
Subnet Mask
Type the subnet mask if the Subnet Address type is selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Below is an example of IP objects settings.
4.5.2 IP Group
This page allows you to bind several IP objects into one IP group.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Page 167 / 335
Vigor2710 Series User’s Guide
155
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose WAN, LAN or Any to display all the available IP
objects with the specified interface.
Available IP Objects
All the available IP objects with the specified interface chosen
above will be shown in this box.
Selected IP Objects
Click
>>
button to add the selected IP objects in this box.
Page 168 / 335
Vigor2710 Series User’s Guide
156
4.5.3 Service Type Object
You can set up to 96 sets of Service Type Objects with different conditions.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Name
Type a name for this profile.
Protocol
Specify the protocol(s) which this profile will apply to.
Source/Destination Port
Source Port
and the
Destination Port
column are available for
TCP/UDP protocol. It can be ignored for other protocols. The
filter rule will filter out any port number.
Page 169 / 335
Vigor2710 Series User’s Guide
157
(=)
– when the first and last value are the same, it indicates
one port; when the first and last values are different, it
indicates a range for the port and available for this profile.
(!=)
– when the first and last value are the same,
it indicates
all the ports except the port defined here; when the first
and
last values are different, it indicates that all the ports
except the range defined here are available for this service
type.
(>)
–
the port number greater than this value is available.
(<)
–
the port number less than this value is available for this
profile.
Below is an example of service type objects settings.
4.5.4 Service Type Group
This page allows you to bind several service types into one group.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Page 170 / 335
Vigor2710 Series User’s Guide
158
Name
Type a name for this profile.
Available Service Type
Objects
All the available service objects that you have added on
Objects Setting>>Service Type Object
will be shown in
this box.
Selected Service Type
Objects
Click
>>
button to add the selected IP objects in this box.
4.5.5 Keyword Object
You can set 200 keyword object profiles for choosing as black /white list in
CSM
>>URL
Web Content Filter Profile.
Set to Factory Default
Clear all profiles.
Click the number under Index column for setting in detail.
19216811.live