DrayTek Vigor-2710 Router Manual PDF (Setup & Configuration Guide)

Page 161 / 335 Scroll up to view Page 156 - 160

Vigor2710 Series User’s Guide

149

4.4.4 DoS Defense

As a sub-functionality of IP Filter/Firewall, there are 15 types of detect/ defense function in

the

DoS Defense

setup. The DoS Defense functionality is disabled for default.

Click

Firewall

and click

DoS Defense

to open the setup page.

Enable Dos Defense

Check the box to activate the DoS Defense Functionality.

Select All

Click this button to select all the items listed below.

Enable SYN flood defense

Check the box to activate the SYN flood defense function.

Once detecting the Threshold of the TCP SYN packets from

the Internet has exceeded the defined value, the Vigor router

will start to randomly discard the subsequent TCP SYN

packets for a period defined in Timeout. The goal for this is

prevent the TCP SYN packets’ attempt to exhaust the

limited-resource of Vigor router. By default, the threshold and

timeout values are set to 50 packets per second and 10

seconds, respectively.

Enable UDP flood

defense

Check the box to activate the UDP flood defense function.

Once detecting the Threshold of the UDP packets from the

Internet has exceeded the defined value, the Vigor router will

start to randomly discard the subsequent UDP packets for a

period defined in Timeout. The default setting for threshold

and timeout are 150 packets per second and 10 seconds,

respectively.

Enable ICMP flood

Check the box to activate the ICMP flood defense function.

Page 162 / 335

Vigor2710 Series User’s Guide

150

defense

Similar to the UDP flood defense function, once if the

Threshold of ICMP packets from Internet has exceeded the

defined value, the router will discard the ICMP echo requests

coming from the Internet. The default setting for threshold and

timeout are 50 packets per second and 10 seconds, respectively.

Enable PortScan

detection

Port Scan attacks the Vigor router by sending lots of packets to

many ports in an attempt to find ignorant services would

respond. Check the box to activate the Port Scan detection.

Whenever detecting this malicious exploration behavior by

monitoring the port-scanning Threshold rate, the Vigor router

will send out a warning. By default, the Vigor router sets the

threshold as 150 packets per second.

Block IP options

Check the box to activate the Block IP options function. The

Vigor router will ignore any IP packets with IP option field in

the datagram header. The reason for limitation is IP option

appears to be a vulnerability of the security for the LAN

because it will carry significant information, such as security,

TCC (closed user group) parameters, a series of Internet

addresses, routing messages...etc. An eavesdropper outside

might learn the details of your private networks.

Block Land

Check the box to enforce the Vigor router to defense the Land

attacks. The Land attack combines the SYN attack technology

with IP spoofing. A Land attack occurs when an attacker sends

spoofed SYN packets with the identical source and destination

addresses, as well as the port number to victims.

Block Smurf

Check the box to activate the Block Smurf function. The Vigor

router will ignore any broadcasting ICMP echo request.

Block trace router

Check the box to enforce the Vigor router not to forward any

trace route packets.

Block SYN fragment

Check the box to activate the Block SYN fragment function.

The Vigor router will drop any packets having SYN flag and

more fragment bit set.

Block Fraggle Attack

Check the box to activate the Block fraggle Attack function.

Any broadcast UDP packets received from the Internet is

blocked.

Activating the DoS/DDoS defense functionality might block

some legal packets. For example, when you activate the

fraggle attack defense, all broadcast UDP packets coming

from the Internet are blocked. Therefore, the RIP packets from

the Internet might be dropped.

Block TCP flag scan

Check the box to activate the Block TCP flag scan function.

Any TCP packet with anomaly flag setting is dropped. Those

scanning activities include

no flag scan

,

FIN without ACK

scan

,

SYN FINscan

,

Xmas scan

and

full Xmas scan

.

Block Tear Drop

Check the box to activate the Block Tear Drop function. Many

machines may crash when receiving ICMP datagrams (packets)

that exceed the maximum length. To avoid this type of attack,

the Vigor router is designed to be capable of discarding any

fragmented ICMP packets with a length greater than 1024

octets.

Page 163 / 335

Vigor2710 Series User’s Guide

151

Block Ping of Death

Check the box to activate the Block Ping of Death function.

This attack involves the perpetrator sending overlapping

packets to the target hosts so that those target hosts will hang

once they re-construct the packets. The Vigor routers will

block any packets realizing this attacking activity.

Block ICMP Fragment

Check the box to activate the Block ICMP fragment function.

Any ICMP packets with more fragment bit set are dropped.

Block Unknown Protocol

Check the box to activate the Block Unknown Protocol

function. Individual IP packet has a protocol field in the

datagram header to indicate the protocol type running over the

upper layer. However, the protocol types greater than 100 are

reserved and undefined at this time. Therefore, the router

should have ability to detect and reject this kind of packets.

Warning Messages

We provide Syslog function for user to retrieve message from

Vigor router. The user, as a Syslog Server, shall receive the

report sending from Vigor router which is a Syslog Client.

All the warning messages related to

DoS Defense

will be sent

to user and user can review it through Syslog daemon. Look for

the keyword

DoS

in the message, followed by a name to

indicate what kind of attacks is detected.

Page 164 / 335

Vigor2710 Series User’s Guide

152

4.5 Objects Settings

For IPs in a range and service ports in a limited range usually will be applied in configuring

router’s settings, therefore we can define them with

objects

and bind them with

groups

for

using conveniently. Later, we can select that object/group that can apply it. For example, all

the IPs in the same department can be defined with an IP object (a range of IP address).

4.5.1 IP Object

You can set up to 192 sets of IP Objects with different conditions.

Set to Factory Default

Clear all profiles.

Click the number under Index column for settings in detail.

Page 165 / 335

Vigor2710 Series User’s Guide

153

Name

Type a name for this profile. Maximum 15 characters are

allowed.

Interface

Choose a proper interface.

For example, the

Direction

setting in

Edit Filter Rule

will

ask you specify IP or IP range for WAN or LAN or any IP

address. If you choose LAN as the

Interface

here, and choose

LAN as the direction setting in

Edit Filter Rule

, then all the

IP addresses specified with LAN interface will be opened for

you to choose in

Edit Filter Rule

page.

Address Type

Determine the address type for the IP address.

Select

Single Address

if this object contains one IP address

only.

Select

Range Address

if this object contains several IPs

within a range.

Select

Subnet Address

if this object contains one subnet for

IP address.

Select

Any Address

if this object contains any IP address.

Select

Mac Address

if this object contains Mac address.

MAC Address

Type the MAC address of the network card which will be

controlled.

Start IP Address

Type the start IP address for Single Address type.

End IP Address

Type the end IP address if the Range Address type is selected.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share