Page 41 / 241 Scroll up to view Page 36 - 40
Vigor2130 Series User’s Guide
33
3.1.1 Internet Access
This page allows you to set WAN configuration with different modes. Use the Connection
Type drop down list to choose one of the WAN modes. The corresponding page will be
displayed.
Static
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use
Static
as the accessing protocol of the internet, please choose
Static
mode from
Connection Type
drop down menu. The following web page will be shown.
Page 42 / 241
Vigor2130 Series User’s Guide
34
IP Address
Type the IP address.
Subnet Mask
Type the subnet mask.
Gateway IP Address
Type the gateway IP address.
Primary DNS Server
Type in the primary IP address for the router if you want to use
Static IP
mode.
Secondary DNS Server
Type in secondary IP address for using in the future if
necessary.
Mode
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose
ARP
Detect
or
Ping Detect
for the system to execute for WAN
detection.
Ping IP
If you choose
Ping Detect
as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address
It is available when the box of Enable is checked. Click
Clone
MAC Address
. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click
OK
to activate them.
Page 43 / 241
Vigor2130 Series User’s Guide
35
DHCP
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose
DHCP
mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name
Type in a name for the router. It must be the same as the name
used in Syslog.
Mode
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose
ARP
Detect
or
Ping Detect
for the system to execute for WAN
detection.
Ping IP
If you choose
Ping Detect
as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address
It is available when the box of Enable is checked. Click
Clone
MAC Address
. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click
OK
to activate them.
Page 44 / 241
Vigor2130 Series User’s Guide
36
PPPoE
To choose PPPoE as the accessing protocol of the internet, please select
PPPoE
from the
Internet Access
menu. The following web page will be shown.
Username
Type in the username provided by ISP in this field.
Password
Type in the password provided by ISP in this field.
Redial Policy
If you want to connect to Internet all the time, you can choose
Always On
. Otherwise, choose
Connect on Demand
.
Idle Time Out
Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose
Connect
on Demand,
you have to type value here.
MTU Size
It means Max Transmit Unit for packet. The default
setting is 1442.
Leave blank for default value.
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Mode
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose
ARP
Detect
or
Ping Detect
for the system to execute for WAN
detection.
Ping IP
If you choose
Ping Detect
as detection mode, you have to type
IP address in this field for pinging.
Clone MAC Address
It is available when the box of Enable is checked. Click
Clone
MAC Address
. The result will be displayed in the field of
MAC Address.
Page 45 / 241
Vigor2130 Series User’s Guide
37
After finishing all the settings here, please click
OK
to activate them.
PPTP/L2TP
To use
PPTP/L2TP
as the accessing protocol of the internet, please choose
PPTP/L2TP
from
Connection Type
drop down menu. The following web page will be shown.
Username
Type in the username provided by ISP in this field.
Password
Type in the password provided by ISP in this field.
Server Address
Type in the IP address for PPTP /L2TP server.
WAN IP Network Settings
You can choose Static IP or DHCP as WAN IP network setting.
IP Address
Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask
Type the subnet mask if you chose Static IP as the WAN IP.
Primary DNS Server
If you choose
Static IP
for WAN IP Network Settings, you
must specify a DNS server IP address here because your ISP
should provide you with usually more than one DNS Server. If
your ISP does not provide it, the router will apply a default
DNS Server automatically.
Secondary DNS Server
If you choose
Static IP
for WAN IP Network Settings, you can
specify secondary DNS server IP address here because your ISP
often provides you more than one DNS Server. If your ISP does
not provide it, the router will apply a default secondary DNS
Server automatically.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top