1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2130
    5. /
  5. 42
Page 206 / 241 Scroll up to view Page 201 - 205
Vigor2130 Series User’s Guide
198
Tunnel Information
Display interface name (used to send TSPC prefix), tunnel
mode, local endpoint addresses, remote endpoint address,
TSPC Prfix, TSPC Prefixlen (prefix length), tunnel broker
and so on.
Tunnel Status
Disconnected
- The remote client doesn't connect to the
tunnel server.
Connecting
- The remote client is connecting to the tunnel
server.
Connected
– The remote client has been connected to the
tunnel server.
Activity
Sent -
sent to the tunnel (RX bytes).
Received
- received from the tunnel (RX bytes).
When the router connects to the tunnel broker, the router will use RADVD to transmit the
prefix to the PC on LAN. Next, the PC will generate one set of IPv6 public IP (see the figure
below). Users can use such IP for connecting to IPv6 network.
When your PC obtains the IPv6 address, please connect to http://www.ipv6.org
. If your PC
access Internet via IPv6 connection, your IPv6 address will be shown on the web page
immediately. Refer to the following figure.
Page 207 / 241
Vigor2130 Series User’s Guide
199
4.11 User
4.11.1 User Configuration
This page allows you to set user’s setting that allowed to use PPTP, FTP, IPSEC/L2TP
connection.
Adding a New User
Click
Add a New User
to open the following page.
Username
Type a name for this user.
Full Name
Type full name for this user.
Password
Type the password for this user.
Confirm Password
Type the password again for confirmation.
Allow Disk Sharing
Check this box to have the remote user share the disk
information.
Allow IPSEC/L2TP
Check this box to let the remote user connecting to this
device through IPSEC/L2TP
.
Allow PPTP
Check this box to let the remote user connecting to this
device through PPTP
.
Allow FTP
Check this box to let the remote user connecting to FTP
server via this router.
Delete User
Remove settings on current page and delete the user. This
button is not available for new configuration by pressing
Add a New User
.
Page 208 / 241
Vigor2130 Series User’s Guide
200
When you finish the settings, simply click
OK
to save the configuration. The new user will be
created and displayed on the page.
Editing/Deleting User Settings
To edit a user, click the name link under Username to open the following page. Modify the
settings except Username and then click
OK
to save and exit it. If you want to remove such
user settings, simply click
Delete User
.
Page 209 / 241
Vigor2130 Series User’s Guide
201
4.12 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, User Password, Configuration Backup, Syslog/Mail Alert, Time and Date,
Management, Reboot System, and Firmware Upgrade.
Below shows the menu items for System Maintenance.
4.12.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
System Date
Display current time and date for the system server.
System Uptime
Display the connection time for the system server.
System-------
Page 210 / 241
Vigor2130 Series User’s Guide
202
CPU Usage
Display the percentage of the CPU usage of your system.
Memory Usage
Display the size of the memory usage and the percentage.
LAN-------
MAC Address
Display the MAC address of the LAN Interface.
IP Address
Display the IP address of the LAN interface.
IP Mask
Display the subnet mask address of the LAN interface.
IPv6 Address (Global)
Display the global IPv6 address of the LAN interface.
IPv6 Address (Link)
Display the link local IPv6 address of the LAN interface.
DHCP Server
Display if the DHCP server is active or not.
WAN-------
Connection Mode
Display current connection type used.
Link Status
Display the connection status.
MAC Address
Display the MAC address of the WAN Interface.
IP Address
Display the IP address of the WAN interface.
IP Mask
Display the subnet mask address of the WAN interface.
IPv6 Address (Link)
Display the IPv6 address of the WAN interface.
Default Gateway
Display the gateway address of the WAN interface.
Primary DNS
Display the specified primary DNS setting.
Secondary DNS
Display the specified secondary DNS setting.
Wireless LAN-------
MAC Address
Display the MAC address of the wireless LAN.
Device Type
Display the device type used for wireless LAN.
SSID
Display the SSID of the router.
Channel
Display the channel that wireless LAN used.
Manufacturer
Display the manufacturer of the disk.
Model
Display the model of the disk.
Size
Display the storage size of the USB diskette.
Status
Display current status of the USB diskette.
4.12.2 TR-069
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.

Rate

4.3 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top