1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2130
    5. /
  5. 40
Page 196 / 241 Scroll up to view Page 191 - 195
Vigor2130 Series User’s Guide
188
Link-Local address is used for communicating with neighbouring nodes on the same link. It is
defined by the address prefix
fe80::/10
. You don't need to setup Link-Local address manually
for it is generated automatically according to your MAC Address.
IPv6 Address
The least significant 64 bits are usually chosen as the interface
hardware address constructed in modified EUI-64 format.
Prefix Length
Display the fixed value (64) for prefix length.
Static IPv6
This type allows you to setup static IPv6 address for WAN.
IPv6 Address
Type your IPv6 static IP here.
Prefix Length
Type your IPv6 address prefix length here.
Gateway IPv6 Server
Type your IPv6 gateway address here.
Primary DNS Server
Type your IPv6 primary DNS Server address here.
Secondary DNS Server
Type your IPv6 secondary DNS Server address here.
Page 197 / 241
Vigor2130 Series User’s Guide
189
DHCPv6 Client (IA_NA)
DHCPv6 client mode would use IA_NA option of DHCPv6 protocol to obtain IPv6 address
from server.
Primary DNS Server
Type primary DNS Server address here.
Secondary DNS Server
Type secondary DNS Server address here
DHCPv6 Client (IA_PD)
DHCPv6 client mode would use IA_PA option of DHCPv6 protocol to obtain IPv6 prefix
from server.
TSPC
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexage
(http://go6.net/4105/register.asp
) before you try to use TSPC for network connection. TSPC
would connect to tunnel broker and requests a tunnel according to the specifications inside the
configuration file. It gets a public IPv6 IP address and an IPv6 prefix from the tunnel broker
and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Page 198 / 241
Vigor2130 Series User’s Guide
190
Username
Type the name obtained from the broker. “vigor2130” is a
default username applied from
http://go6.net/4105/register.asp
. It is suggested for you to
apply another username and password.
Password
Type the password assigned with the user name.
Confirm Password
Type the password again to make the confirmation.
Tunnel Broker
Type the address
for the tunnel broker IP, FQDN or an
optional port number.
Tunnel Mode
IPv6-in-IPv4 Tunnel
- Let the broker choose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native)
- Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal
- Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
Auto-reconnect Delay
After passing the time set here, the client will retry to
connect in case of failure or keepalive timeout.
0 means not retry.
Keepalive
Yes
– Keep the connection between TSPC and tunnel
broker always on. TSPC will send ping packet to make
sure the connection between both ends is normal.
No
- The client will not send keepalives.
Keepalive_interval
Type the time for the interval between two keepalive
messages transferring from the client to the broker.
Page 199 / 241
Vigor2130 Series User’s Guide
191
Prefixlen
Type the required prefix length for the client network.
If_prefix
Display LAN interface name.
The name of the OS
interface that will be configured with the first 64 of
the received prefix from the broker and the router
advertisement daemon is started to advertise that
prefix on the if_prefix interface.
4.10.2 IPv6 LAN Setup
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 Server and RADVD. Each type requires different parameter settings.
IPv6 Address
Type static IPv6 address for LAN.
IPv6 Link_local Address
It is used for communicating with neighbouring nodes on
the same link. It is defined by the address prefix fe80::/10.
You don't need to setup Link-Local address manually for it
is generated automatically according to your MAC
Address.
Enable Autoconfiguration
Check this box to enable the auto-configuration function
for IPv6 connection.
Configuration Type
Vigor2130 provides 2 daemons for LAN side IPv6 address
configuration. One is
RADVD
(stateless) and the other is
DHCPv6 Server
(Stateful).
DHCPv6 Server
- DHCPv6 Server could assign IPv6
address to PC according to the Start/End IPv6 address
configuration.
IPv6 Start Address/IPv6 End Address
- Type the start and
end address for IPv6 server.
Page 200 / 241
Vigor2130 Series User’s Guide
192
RADVD -
The router advertisement daemon (radvd) sends
Router Advertisement messages, specified by RFC 2461,
to a local Ethernet LAN periodically and when requested
by a node sending a Router Solicitation message. These
messages are required for IPv6 stateless autoconfiguration.
Advertisement Lifetime
-
The lifetime associated with
the default router in units of seconds. It's used to control
the lifetime of the prefix. The maximum value corresponds
to 18.2 hours. A lifetime of 0 indicates that the router is not
a default router and should not appear on the default router
list.
4.10.3 IPv6 Firewall Setup
This page allows users to set firewall rules for IPv6 packets.
Note
: Section 4.4
Firewall
is configured for IPv4 packets only.
Name
Display the name of the rule.
Protocol
Display the protocol (TCP/UDP/ICMPv6) the rule uses.
Source IP
Display the source IP address of such rule.
Destination IP
Display the destination IP address of such rule.
Source Port
Display the source port number of such rule.
Destination Port
Display the destination port number of such rule.
Action
Display the status (accept or drop) of such rule.

Rate

4.3 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top