Vigor2130 Series User’s Guide

63

z

If you choose

ToS

as QCE Type, you have to specify priority class from Low, Normal,

Medium and High.

z

If you choose

Tag Priority

as QCE Type, you have to specify priority class from Low,

Normal, Medium and High.

Editing a QCE

Click

to modify the settings of an existing QCE on this page.

Moving Up/Down a QCE

Click

and

to move a QCE up and down.

Vigor2130 Series User’s Guide

64

Deleting a QCE

To delete a QCE in the list, simply click

of that one. It will be removed immediately.

3.4.5 Ports Priority

This page allows you to configure QoS settings for each port. The classification is controlled

by a QCL (Quality Control List) that is assigned to each port. A QCL consists of an ordered

list of up to 12 QCEs (Quality Control Entry). Each QCE can be used to classify certain

frames to a specific QoS class. This classification can be based on parameters such as VLAN

ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. Frames not matching any of the QCEs

are classified to the default QoS class for the port.

Port

Indicate the interface for the physical port, WAN port, LAN

port and Wireless Port.

Default Class

Use the drop down list to choose the priority for each port.

QCL

Use the drop down list to choose the QCL number defined in

QoS Control List for the port.

Queuing Mode

Use the drop down list to choose suitable mode.

Vigor2130 Series User’s Guide

65

Queue Weighted

Use the drop down list to choose 1, 2, 4, or 8 as the queue

weighted number.

3.4.6 QoS Statistics

This page displays statistics for QoS setting. Click WAN/LAN link to check detailed

information for each interface.

Click

WAN/LAN

link to check detailed information for each interface.

Rx Packets

Display the counting number of the packet received.

Rx Octets

Display the total received bytes.

Rx Unicast

Display the counting number of the received unicast packet.

Vigor2130 Series User’s Guide

66

Rx Broadcast

Display the counting number of the received broadcast packet.

Rx Pause

Display the counting number of the received pause packet.

RX 64 Bytes

Display the number of 64-byte frames in good and bad packets

received.

RX 65-127 Bytes

Display the number of 65 ~ 127-byte frames in good and bad

packets received.

RX 128-255 Bytes

Display the number of 128 ~ 255-byte frames in good and bad

packets received.

RX 256-511 Bytes

Display the number of 256 ~ 511-byte frames in good and bad

packets received.

RX 512-1023 Bytes

Display the number of 512 ~ 1023-byte frames in good and bad

packets received.

RX 1024- 1526 Bytes

Display the number of 1024-1522-byte frames in good and bad

packets received.

RX 1527 Bytes

Display the number of 1527-byte frames in good and bad

packets received.

Rx Low

Display the low queue counter of the packet received.

Rx Normal

Display the normal queue counter of the packet received.

Rx Medium

Display the medium queue counter of the packet received.

Rx High

Display the high queue counter of the packet received.

Rx Drops

Display the number of frames dropped due to the lack of

receiving buffer.

Rx CRC/Alignment

Display the number of Alignment errors packets received.

Rx Undersize

Display the number of short frames (<64 Bytes) with valid

CRC.

Rx Oversize

Display the number of long frames (according to max_length

register) with valid CRC.

Rx Fragments

Display the number of short frames (< 64 bytes) with invalid

CRC.

Rx Jabber

Display the number of long frames (according tomax_length

register) with invalid CRC.

Rx Filtered

Display the filtered number of the packet received.

Tx Packets

Display the counting number of the packet transmitted.

Tx Octets

Display the total transmitted bytes.

Tx Unicast

Display the show the counting number of the transmitted

unicast packet.

Tx Multicast

Display the show the counting number of the transmitted

multicast packet.

Tx Broadcast

Display the counting number of the transmitted broadcast

packet.

Tx Pause

Show the counting number of the transmitted pause packet.

Vigor2130 Series User’s Guide

67

Tx 64 Bytes

Display the number of 64-byte frames in good and bad packets

transmitted.

Tx 65-127 Bytes

Display the number of 65 ~ 127-byte frames in good and bad

packets transmitted.

Tx 128-255 Bytes

Display the number of 128 ~ 255-byte frames in good and bad

packets transmitted.

Tx 256-511 Bytes

Display the number of 256 ~ 511-byte frames in good and bad

packets transmitted.

Tx 512-1023 Bytes

Display the number of 512 ~ 1023-byte frames in good and bad

packets transmitted.

Tx 1024- 1526 Bytes

Display the number of 1024 ~ 1522-byt frames in good and bad

packets transmitted.

Tx 1527 Bytes:

Display the number of 1527-byte frames in good and bad

packets transmitted.

Tx Low

Display the low queue counter of the packet transmitted.

Tx Normal

Display the normal queue counter of the packet transmitted.

Tx Medium

Display the medium queue counter of the packet received.

Tx High

Display the high queue counter of the packet received.

Tx Drops

Display the number of frames dropped due to excessive

collision, late collision, or frame aging.

Tx lat/Exc.Coll.

Display the number of Frames late collision or excessive

collision Error, which switch transmitted

3.5 Applications

Below shows the menu items for Applications.

3.5.1 Dynamic DNS

The ISP often provides you with a dynamic IP address when you connect to the Internet via

your ISP. It means that the public IP address assigned to your router changes each time you

access the Internet. The Dynamic DNS feature lets you assign a domain name to a dynamic

WAN IP address. It allows the router to update its online WAN IP address mappings on the

specified Dynamic DNS server. Once the router is online, you will be able to use the

registered domain name to access the router or internal virtual servers from the Internet. It is

particularly helpful if you host a web server, FTP server, or other server behind the router.

Before you use the Dynamic DNS feature, you have to apply for free DDNS service to the

DDNS service providers. The router provides up to three accounts from three different DDNS

service providers. Basically, Vigor routers are compatible with the DDNS services supplied by

most popular DDNS service providers such as

www.dyndns.org, www.no-ip.com,