19216811.liveVigor2830 Series User’s Guide
344
Transmission Rate is not fast enough
Please connect your Notebook with 3G USB Modem to test the connection speed to verify if
the problem is caused by Vigor2830. In addition, please refer to the manual of 3G USB
Modem for LED Status to make sure if the modem connects to Internet via HSDPA mode. If
you want to use the modem indoors, please put it on the place near the window to obtain better
signal receiving.
6.6 Backing to Factory Default Setting If Necessary
Sometimes, a wrong connection can be improved by returning to the default settings. Try to
reset the router by software or hardware. Such function is available in
Admin Mode
only.
Warning:
After pressing
factory default setting
, you will loose all settings you did
before. Make sure you have recorded all useful settings before you pressing. The
password of factory default is null.
Software Reset
You can reset the router to factory default via Web page. Such function is available in
Admin
Mode
only.
Go to
System Maintenance
and
choose
Reboot System
on the web page. The following
screen will appear. Choose
Using factory default configuration
and click
OK
. After few
seconds, the router will return all the settings to the factory settings.