Page 26 / 357 Scroll up to view Page 21 - 25
Vigor2830 Series User’s Guide
14
This page is left blank.
Page 27 / 357
Vigor2830 Series User’s Guide
15
2
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
B
B
a
a
s
s
i
i
c
c
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
For using the router properly, it is necessary for you to change the password of web
configuration for security and adjust primary basic settings.
2.1 Two-Level Management
This chapter explains how to setup a password for an administrator/user and how to adjust
basic/advanced settings for accessing Internet successfully.
For user mode operation, do not type any word on the window and click Login for
the simple web pages for configuration.
Yet, for admin mode operation, please type “admin/admin” on Username/Password
and click Login for full configuration.
2.2 Accessing Web Page
1.
Make sure your PC connects to the router correctly.
You may either simply set up your computer to get IP dynamically from the router or set
up the IP address of the computer to be the same subnet as
the default IP address of
Vigor router 192.168.1.1
. For the detailed information, please refer to the later section -
Trouble Shooting of the guide.
2.
Open a web browser on your PC and type
The following window
will be open to ask for username and password.
3.
For user mode operation, do not type any word on the window and click
Login
for the
simple web pages for configuration. Yet, for admin mode operation, please type
“admin/admin” on Username/Password and click
Login
for full configuration.
Notice:
If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problem.
4.
The web page can be logged out according to the chosen condition. The default setting is
Auto Logout
, which means the web configuration system will logout after 5 minutes
without any operation. Change the setting for your necessity.
Page 28 / 357
Vigor2830 Series User’s Guide
16
2.3 Changing Password
No matter user mode operation or admin mode operation, please change the password for the
original security of the router.
1.
Open a web browser on your PC and type
A pop-up window will
open to ask for username and password.
2.
Please type “admin/admin” on Username/Password for admin mode. Otherwise, do not
type any word (both username and password are Null for user mode) on the window and
click
Login
on the window.
3.
Now, the
Main Screen
will appear.
Main screen for admin mode operation (full configuration)
Page 29 / 357
Vigor2830 Series User’s Guide
17
Main screen for user mode operation (simple configuration)
Note:
The home page will change slightly in accordance with the type of the router
you have.
4.
Go to
System
Maintenance
page and choose
Administrator Password/User
Password
.
or
5.
Enter the login password (the default is blank) on the field of
Old Password
. Type
New
Password
. Then click
OK
to continue.
6.
Now, the password has been changed. Next time, use the new password to access the
Web Configurator for this router.
Page 30 / 357
Vigor2830 Series User’s Guide
18
2.4 Quick Start Wizard
Notice:
Quick Start Wizard for user mode operation is the same as for admin
mode operation.
If your router can be under an environment with high speed NAT, the configuration provide
here can help you to deploy and use the router quickly. The first screen of
Quick Start
Wizard
is entering login password. After typing the password, please click
Next
.
On the next page as shown below, please select the WAN interface that you use. If DSL
interface is used, please choose WAN1; if Ethernet interface is used, please choose WAN2; if
3G USB modem is used, please choose WAN3. Then click
Next
for next step.

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top