1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 52
Page 256 / 357 Scroll up to view Page 251 - 255
Vigor2830 Series User’s Guide
244
Regional
This page allows you to process incoming or outgoing phone calls by regional. Default values
(common used in most areas) will be shown on this web page. You
can change
the number
based on the region that the router is placed.
Enable Regional
Check this box to enable this function.
Last Call Return [Miss]
Sometimes, people might miss some phone calls. Please dial
number typed in this field to know where the last phone call
comes from and call back to that one.
Last Call Return [In]
You have finished an incoming phone call, however you want
to call back again for some reason. Please dial number typed in
this field to call back to that one.
Last Call Return [Out]
Dial the number typed in this field to call the previous outgoing
phone call again.
Call Forward [All][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place.
Call Forward [Deact]
Dial the number typed in this field to release the call forward
function.
Call Forward [Busy][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while the phone is busy.
Call Forward [No Ans][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while there is no answer of the
connected phone.
Page 257 / 357
Vigor2830 Series User’s Guide
245
Do Not Disturb [Act]
Dial the number typed in this field to invoke the function of
DND.
Do Not Distrub [Deact]
Dial the number typed in this field to release the DND function.
Hide caller ID [Act]
Dial the number typed in this field to make your phone number
(ID) not displayed on the display panel of remote end.
Hide caller ID [Deact]
Dial the number typed in this field to release this function.
Call Waiting [Act]
Dial the number typed in this field to make all the incoming
calls waiting for your answer.
Call Waiting [Deact]
Dial the number typed in this field to release this function.
Block Anonymous[Act]
Dial the number typed in this field to block all the incoming
calls with unknown ID.
Block Anonymous[Deact]
Dial the number typed in this field to release this function.
Block Unknown Domain
[Act]
Dial the number typed in this field to block all the incoming
calls from unknown domain.
Block Unknown Domain
[Deact]
Dial the number typed in this field to release this function.
Block IP Calls [Act]
Dial the number typed in this filed to block all the incoming
calls from IP address.
Block IP Calls [Deact]
Dial the number typed in this field to release this function.
Block Last Calls [Act]
Dial the number typed in this field to block the last incoming
phone call.
PSTN Setup
Some emergency phone (e.g., 911) or special phone cannot be dialed out by using VoIP and
can be called out through PSTN line only. To solve this problem, this page allows you to set
five sets of PSTN number for dialing without passing through Internet. Please type the number
in the field of
phone number for
PSTN relay
.
Then, check the
Enable
box to make the PSTN number available for dial whenever you need.
Page 258 / 357
Vigor2830 Series User’s Guide
246
4.12.2 SIP Accounts
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an
Account Name
or user name,
SIP Registrar, Proxy,
and
Domain name
. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in
Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the
destination using AccountName@Domain/Realm as identity.
Note:
Selection items for
Ring Port
will differ according to the router you have.
Index
Click this link to access into next page for setting SIP account.
Profile
Display the profile name of the account.
Domain/Realm
Display the domain name or IP address of the SIP registrar
server.
Proxy
Display the domain name or IP address of the SIP proxy server.
Account Name
Display the account name of SIP address before @.
Ring Port
Specify which port will ring when receiving a phone call. Set
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the ISDN2-TE
selection will be dimmed, vice versa. There are ten internal
Page 259 / 357
Vigor2830 Series User’s Guide
247
lines with numbers (30 – 39) offered for
ISDN-S0
.
You can
specify any one of them as ring port for specified SIP account.
By the way, ISDN-S0 can be used by mapping with MSN
numbers.
Status
Show the status for the corresponding SIP account.
R
means
such account is registered on SIP server successfully.
–
means
the account is failed to register on SIP server.
STUN Server
Type in the IP address or domain of the STUN server.
External IP
Type in the gateway IP address.
SIP PING interval
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Click any index link to access into the following page for configuring SIP account.
Profile Name
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain name
is
draytel.org
, then you might set
draytel-1
in this field.
Register via
If you want to make VoIP call without register personal
information, please choose
None
and check the box to achieve
the goal.
Some SIP server allows user to use VoIP function
without registering. For such server, please check the box of
Call without Registration
. Choosing
Auto
is recommended.
Page 260 / 357
Vigor2830 Series User’s Guide
248
The system will select a proper way for your VoIP call.
SIP Port
Set the port number for sending/receiving SIP message for
building a session. The default value is
5060.
Your peer must
set the same value in his/her Registrar.
Domain/Realm
Set the domain name or IP address of the SIP Registrar server.
Proxy
Set domain name or IP address of SIP proxy server. By the time
you can type
:port
number
after the domain name to specify
that port as the destination of data transmission (e.g.,
nat.draytel.org:5065
)
Act as Outbound Proxy
Check this box to make the proxy acting as outbound proxy.
Display Name
The caller-ID that you want to be displayed on your friend’s
screen.
Account Number/Name
Enter your account name of SIP Address, e.g. every text before
@.
Authentication ID
Check the box to invoke this function and enter the name or
number used for SIP Authorization with SIP Registrar. If this
setting value is the same as Account Name, it is not necessary
for you to check the box and set any value in this field.
Password
The password provided to you when you registered with a SIP
service.
Expiry Time
The time duration that your SIP Registrar server keeps your
registration record. Before the time expires, the router will send
another register request to SIP Registrar again.
NAT Traversal Support
If the router (e.g.
,
broadband router) you use connects to
internet by other device, you have to set this function for your
necessity.
None –
Disable this function.
Stun
– Choose this option if there is STUN server provided for
your router.
Manual
– Choose this option if you want to specify an external
IP address as the NAT transversal support.
Nortel
– If the soft-switch that you use supports Nortel solution,
you can choose this option.
Ring Port
Set Phone 1 and/or Phone 2 as the default ring port(s) for this
SIP account.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top