Page 11 / 42
Scroll up to view Page 6 - 10
Quick Installation Guide
¶
Set Password
It is recommended that you now change the default password for the
UMR configuration pages. Type in the new password and confirm it,
then click on
Next
to continue.
Here is a space to write down your new password:
Page 12 / 42
Quick Installation Guide
±0
Wireless LAN
If you do not have any devices using Wireless LAN, choose disable for
the Wireless LAN option, and then click on
Next
to continue (this will
skip the encryption page). If you have a device using wireless LAN,
enable Wireless LAN.You can also change the SSID, which is displayed
in the client when a network search is performed. When you are done,
click on
Next
to continue.
Page 13 / 42
Quick Installation Guide
±±
Encryption
Here you can activate encryption if you would like to restrict access
of wireless users onto your private network. Choose
Enable
to enable
encryption, it is recommended that you select 128 bits as
Encryption
Strength
and then type in a key. The key is needed by all Wireless LAN
clients to access your private network. Click on
Next
to continue.
Here is a space to write down your new key:
Page 14 / 42
Quick Installation Guide
±2
Configure Internet
This section configures the mobile USB modem you are to use with
the UMR. If the SIM card which you are using from your mobile
operator came with a PIN code, then enter it into the
Pin Code
(if any)
field.
In order for the UMR to successfully establish an Internet via your
mobile operator, you will require the
Access Point Name
(APN) as
provided by your operator. If you are uncertain what your APN is, then
contact your mobile operator or check your USB modem manual.
Page 15 / 42
Quick Installation Guide
±²
Restart
You have now finished the installation. Click on
Close
to save the
changes and the UMR will restart in order for the changes to take
effect.
19216811.live