Page 36 / 50
Scroll up to view Page 31 - 35
32
D-Link VWR User Manual
Chapter 3 - Configuration
Web Access Control
To configure the Vonage VWR Device from a remote computer using a web browser,
check
Enable
and enter the following:
Choose Connection -
Select
WAN
.
Remote Host IP -
Enter the IP address of the remote computer. Enter 0.0.0.0 to allow
any remote computer to connect.
Remote Netmask -
Enter the subnet mask of the remote computer. Enter 255.255.255.255
to allow any remote computer to connect.
Redirect Port -
Enter the port number you would like to use.
Page 37 / 50
33
D-Link VWR User Manual
Chapter 3 - Configuration
Network Statistics
The Network Statistics page will display traffic statistics of the Vonage VWR device.
Page 38 / 50
34
D-Link VWR User Manual
Chapter 3 - Configuration
Connection Status
The Connection Status page will display traffic statistics of the Vonage VWR device.
Page 39 / 50
35
D-Link VWR User Manual
Chapter 3 - Configuration
DDNS Status
The DDNS Status page will display Dynamic DNS statistics.
Connection -
WAN is selected.
DDNS Server -
Select the DDNS service to display statistics for.
Page 40 / 50
36
D-Link VWR User Manual
Chapter 3 - Configuration
DHCP Client
The DHCP Client page will display the following information:
MAC Address -
The MAC address of the device.
IP Address -
The IP address that the Vonage VWR Device assigned the device.
Host Name -
The host name of the device. If the device does not have a host name, it
will be displayed as
Unknown
.
Lease Time -
The remaining DHCP lease time.
19216811.live