D-Link TM-G5240 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 95 Scroll up to view Page 31 - 35

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

33

Shared Secret -

Enter the shared secret. The Shared Secret must the

same as the Shared Secret on your RADIUS server.

o

WPA-PSK –

Wi-Fi Protected Access – Pre-Shared Key mode means that

the wireless client and the router must have the same passphrase in order

to establish the wireless connection. A RADIUS server is not required with

PSK.

Passphrase -

Enter a pass phrase for the router. The client should use the

same pass phrase in order to connect to the router.

o

WPA2

Radius Server -

Enter the IP Address of the RADIUS server.

Port -

Enter the port number that your RADIUS server uses for

authentication. The default setting of 1812 is the port setting for many

RADIUS servers.

Shared Secret -

Enter the shared secret. The Shared Secret must the

same as the Shared Secret on your RADIUS server.

o

WPA2-PSK –

Wi-Fi Protected Access2 – Pre-Shared Key mode means that

the wireless client and the router must have the same pass phrase in order

to establish the wireless connection. A RADIUS server is not required with

PSK.

Passphrase -

Enter a pass phrase for the router. The client should use the

same pass phrase in order to connect to the router..

o

WPA-Auto

Radius Server -

Enter the IP Address of the RADIUS server.

Port -

Enter the port number that your RADIUS server uses for

authentication. The default setting of 1812 is the port setting for many

RADIUS servers.

Shared Secret -

Enter the shared secret. The Shared Secret must the

same as the Shared Secret on your RADIUS server.

•

Channel - 6

is the default channel. All devices on the network must share the

same channel.

(Note: The wireless adapters will automatically scan and match the

wireless setting.)

Downloaded from

www.Manualslib.com

manuals search engine

Page 37 / 95

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

34

•

WEP -

Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless

Local Area Networks (WLAN). WEP provides security by encrypting the data that

is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting.

(Note: If you enable encryption on the TM-G5240 make sure to also enable

encryption on all the wireless clients and match the security settings, or wireless

connection will not be established.)

•

WEP Encryption -

Select the level of encryption desired: 64-bit, or 128-bit.

•

Key Type -

Select HEX or ASCII.

•

Keys 1-4 -

Input up to 4 WEP keys; select the one you wish to use.

Downloaded from

www.Manualslib.com

manuals search engine

Page 38 / 95

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

35

Home > WAN

Home > WAN > Dynamic IP Address

At

Home > WAN > Dynamic IP Address

, you can adjust:

•

Dynamic IP Address

- Choose Dynamic IP Address to obtain IP Address

information automatically from your ISP. Select this option if your ISP does

not give you any IP numbers to use. This option is commonly used for

Cable modem services.

•

Host Name

- The Host Name is optional but may be required by some ISPs.

The default host name is the device name of the router and may be

changed.

•

MAC Address

- The default MAC Address is set to the WAN’s physical

interface MAC address on the wireless router. It is not recommended that

you change the default MAC address unless required by your ISP.

•

Clone MAC Address

- The default MAC address is set to the WAN’s

physical interface MAC address on the wireless router. You can use the

Downloaded from

www.Manualslib.com

manuals search engine

Page 39 / 95

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

36

“Clone MAC Address” button to copy the MAC address of the Ethernet Card

installed by your ISP and replace the WAN MAC address with the MAC

address of the router. It is not recommended that you change the default

MAC address unless required by your ISP.

•

Primary DNS Address -

Input the primary DNS address provided by your

ISP.

•

Secondary DNS Address -

(Optional) Input the secondary DNS address

provided by your ISP.

•

MTU -

Maximum Transmission Unit; default is 1500; you may need to

change the MTU to conform to your ISP (Internet Service Provider).

Downloaded from

www.Manualslib.com

manuals search engine

Page 40 / 95

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

37

Home > WAN > Static IP Address

At

Home > WAN > Static IP Address

, you can adjust:

•

Static IP Address

- Choose Static IP Address if all WAN IP information is

provided to you by your ISP. You will need to enter in the IP address,

subnet mask, gateway address, and DNS address(es) provided to you by

your ISP. Each IP address entered in the fields must be in the appropriate

IP form, which are four octets separated by a dot (x.x.x.x). The router will

not accept the IP address if it is not in this format.

•

IP Address

- Input the public IP Address provided by your ISP.

•

Subnet Mask

- Input your Subnet mask. (All devices in the network must

have the same subnet mask.)

•

ISP Gateway Address

- Input the public IP address of the ISP to which you

are connecting.

•

Primary DNS Address

- Input the primary DNS (Domain Name Server) IP

address provided by your ISP.

•

Secondary DNS Address

-This is optional.

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share